ZERAMEX®P Depth Mark
1Pages

{{requestButtons}}

Catalog excerpts

ZERAMEX®P Depth Mark - 1

NOTE! The drilling depth is up to 0.4 mm deeper than the corresponding implant. SURGERY PHASE Depth mark Standard insertion depth 1.8 mm transgingival 12 mm implant 10 mm implant 8 mm implant Collar height 1.8 mm Intraossal depth 8 mm 0.4 mm ZERAMEX®P Pilot drill Depth gauge ZERAMEX®P Drill ZERAMEX®P Profile drill Optional insertion depth at least 0.8 mm transgingival IMPORTANT: * There will therefore be an increase of up to 1 mm in the intraossal depth of the implants. 12 mm implant* 10 mm implant* 8 mm implant* Collar height 0.8 mm Intraossal depth 9 mm 0.4 mm ZERAMEX®P Pilot drill Depth gauge ZERAMEX®P Drill ZERAMEX®P Profile drill STERILISATION BEFORE OP OP preparation includes steam sterilisation of the surgical tray (surgical instruments) at 134°C for the duration of 18 minutes. IMPORTANT: During surgery you should have a container with saline solution nearby. Place the drill and instruments in the saline solution between uses, if you are to use them repeatedly during a treatment session.

Open the catalog to page 1

All Dentalpoint AG catalogs and technical brochures