ZERAMEX®P6 Impression Open
1Pages

{{requestButtons}}

Catalog excerpts

ZERAMEX®P6 Impression Open - 1

IMPORTANT: The transfer capsule must click firmly onto the hexagon and come to rest precisely on the implant shoulder. Open impression tray In practice: Material list: Transfer parts SN/RN (P35510/P36510) Implant replica SN/RN (P35520/P36520) 1. Positioning: Use slight pressure and a twisting movement to position the transfer capsule on the outer hexago hexagon, comes to rest precisely on the implant shoulder and can no longer be turned. 4. Connecting: Use slight pressure and a twisting movement to position the implant replica on the outer hexagon until it clicks into the hexagon of Impression material the transfer capsule, comes to rest precisely on the shoulder, and can no longer be turned. Screw the locking pin clockwise into place by hand. 5. Impression material 2. Screw securely: Secure the transfer capsule with one hand. Tighten the locking pin clockwise by hand, and check the position to be sure that it interlocks. If in doubt, take an X-ray image for verification. 5. Model fabrication: Make sure that the transfer with the screw-retained implant replica is seated securely. Make the master model. Remove the locking pin before you release the impression. 6. Impression material 3. Impression taking: Make an impression with an open impression tray. Unscrew and remove the locking pin. Loosen the impression and send it to the dental technician with the locking pin. 6. Restoration: Select a secondary part in accordance with the prosthetic needs and and preferred procedures. You can choose between straight and angled screw-retained abutments (see page 29) as well as straight and angled cement-retained abutments and Locator® (see page 35).

Open the catalog to page 1

All Dentalpoint AG catalogs and technical brochures