DENTATUS’ FACE BOW & EAR BOW RANGE FOR EFFICIENT AND ACCURATE STUDY OF OCCLUSAL RELATIONS The Benchmark for Dental Perfection The Advantages • High reliability by obtaining precise data from the patient • Easy transfer of accurate data to Dentatus articulators • Long lasting quality The Dentatus´ Face Bow and Ear Bow are designed to meet the same high demands for stability and durability as the Dentatus articulators. The face bow and ear bow are used for patient jaw registrations on the correct positioning of teeth in relation to the temporomandibular during insertion in the articulator. The two variants are available depending on the preferred method used for determining the condular position on the patient. With Dentatus´ Face Bow and Ear Bow it is easy to obtain precise data from the patient and accurately transfer this information into and in order to fully utilize the scientifically designed Dentatus articulators. Only then are the precision Dentatus articulators used at greater advantage. In addition, to accommodate extreme cases the Dentatus Face Bow has been made somewhat larger than ordinary face bows. The Dentatus´ Face Bow and Ear Bow fit all Dentatus Articulators with exception for model AEE on older Dentatus articulators without auditory pins. Manufactured from high quality aluminium Precise and reliable performance Swedish quality

Product Information and Maintenance Instruction The AEB Face Bow is equipped with Standard Calibrated Condylar Rods. The cranial contact points on the Calibrated Condylar Rods are to be positioned at the corresponding positions of the patient’s condyles. When transferred to the articulator, the Calibrated Condylar Rods fit on the Condylar Axis’s on the articulator. The AEE Ear bow is equipped with Calibrated Condylar Rods with blue rounded ear pieces, to be used in the patient’s ear openings. This makes it easier for the operator to handle the face bow single handedly. When transferred to the...