Paste Stain

Product catalog summary

Product Overview:
The Dentium Dental Lab System's rainbow™ Paste Stain is designed for ease of use with a paste-like consistency that allows for uniform application. It is available in 16 commonly used shades and is suitable for use with zirconia materials due to its similar linear thermal expansion coefficient, minimizing fracture risk during sintering.

Sintering Guide:
The recommended sintering process involves starting at a temperature of 450°C with a drying time of 8 minutes. The heating rate should be 45°C per minute until reaching a sintering temperature of 790°C, with a retention time of 1 minute. Adjustments may be necessary based on the sintering furnace specifications and prosthesis size.

Key Specifications:

Sintering temperature requirement is under 800°C.
Linear thermal expansion coefficient from 25°C to 500°C is (9.5±0.5)x10-6/°C.

Catalog excerpts

Dentium Dental Lab System

Open the catalog to page 1

New Product Dentium Dental Lab System rainbow™ Paste Stain The paste-like consistency of the product allows ease of use and makes uniform application possible The sintering temperature requirement is under 800˚C Available in 16 most commonly used shades Linear thermal expansion coefficient (from 25°C to 500°C): (9.5±0.5)x10-6/°C * The above measurement is similar to that of a Zirconia material, preventing the risk of fracture during sintering. Contoured Prosthesis Application of Paste Stain Final Glaze rainbow™ Paste Stain Sintering Guide Starting Temp. Drying Time Heating Rate Sintering Temp....

Open the catalog to page 2

All Dentium catalogs and technical brochures

Archived catalogs

Regeneration Bone Grafting & Soft Tissue Management
24 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list