video corpo

SlimLine
28Pages

{{requestButtons}}

Catalog excerpts

SlimLine - 1

SlimLine Product Catalog & Manual SlimLine Product Catalog / Manual

Open the catalog to page 1
SlimLine - 2

SlimLine Product Catalog & Manual

Open the catalog to page 2
SlimLine - 3

Prosthetic Procedure Dual Abutment (Fix Type) 12 Angled Abutment (Fix Type) 13 Abutment Level Impression Components 14 Surgical Manual Surgical Drill Sequence 18 Prosthesis Manual Prosthetic Manual - Indirect 22 Prosthetic Manual - Direct 23

Open the catalog to page 3
SlimLine - 4

SlimLine Product Catalog & Manual

Open the catalog to page 4
SlimLine - 5

SlimLine Product Catalog & Manual S.L.A. Surface S.L.A. (Sandblasting with large grit and acid etching) · Higher bone-to-implant contact. · Faster bone formation on the surface. Human osteoblast · Well attached and proliferated human osteoblasts.

Open the catalog to page 5
SlimLine - 6

SlimLine Product Catalog & Manual SlimLine Characteristics Unit: mm One Body Design • S.L.A. surface enables immediate or early loading • Mini ball (Ø1.8) & metal socket make denture production easy • Wide range of choice for prosthetic options Mini Ball Type

Open the catalog to page 6
SlimLine - 7

SlimLine Product Catalog & Manual SlimLine Characteristics Unit: mm Mini O-Ring Retention Force Mini O-ring • Mini ball size (Ø1.8) • Mini o-ring type denture socket • Minimal-size denture socket • Mini o-ring are replaceable Angled Abutment Selecting direction is easy due to the Octa 45° rotation angles. • Slanted implanting is possible with the combination of angled abutment (15°, 25°). • Cement the final restoration onto the abutment. Double-threaded Design Tilting Angle • Increased thread height helps strengthen the initial stability. 15° Up to ±15 degrees of tilting angles to...

Open the catalog to page 7
SlimLine - 8

08 SlimLine Product Catalog & Manual Mini Ball Type Fixture Unit: mm, Scale 1 : 1 / mm

Open the catalog to page 8
SlimLine - 9

SlimLine Product Catalog & Manual 09

Open the catalog to page 9
SlimLine - 10

SlimLine Product Catalog & Manual Prosthetic Procedure Impression Technique and Restoration Selection Mini Ball Type Impression Coping Impression Coping Socket Spacer Page 11 Mini O-ring Page 11 Denture Socket Angled Abutment Dual Abutme

Open the catalog to page 10
SlimLine - 11

SlimLine Product Catalog & Manual Denture Components Unit: mm, Scale 1 : 1.5 / mm Denture Socket Female Socket

Open the catalog to page 11
SlimLine - 12

12 SlimLine Product Catalog & Manual

Open the catalog to page 12
SlimLine - 13

SlimLine Product Catalog & Manual Angled Abutment [Fix Type] Unit: mm, Scale 1 : 1.5 / mm

Open the catalog to page 13
SlimLine - 14

14 SlimLine Product Catalog & Manual Burn-out Cylinder Type

Open the catalog to page 14
SlimLine - 15

SlimLine Product Catalog & Manual 15 Surgical Kit SlimLine Surgical Kit XSLSKit includes XFDS 23 35

Open the catalog to page 15
SlimLine - 16

SlimLine Product Catalog & Manual Drill / Instrument Unit: mm, Scale 1 : 1 / mm Implant Driver Type Driver Type

Open the catalog to page 16
SlimLine - 17

SlimLine Product Catalog & Manual Manual Surgical Manual Prosthesis Manual

Open the catalog to page 17
SlimLine - 18

SlimLine Product Catalog & Manual Surgical Drill Sequence Drilling Sequence Guide . Final Drill: 1,000rpm / 30~45N.cm

Open the catalog to page 18
SlimLine - 19

SlimLine Product Catalog & Manual Surgical Process Implantation Process: Use the cap to start the implantation of the fixture. When the linkage between the cap and fixture deforms after reaching 5N·cm of tightening force, remove the disengaged cap and continue implantation using the MF tool in the surgical kit. Implant driver Please make sure that the fixture and the implant driver are engaged completely before loading. Complete engagement Incomplete engagement

Open the catalog to page 19
SlimLine - 20

SlimLine Product Catalog & Manual Prosthetic Process Fix Type Angled Abutment Cementation:

Open the catalog to page 20
SlimLine - 21

SlimLine Product Catalog & Manual Prosthetic Manual Ball Type Fixture Chairside SlimLine mini ball type ixture. Fixture installation. Produce the individual tray for denture impression Aix the impression coping on the mini ball type ixture. Apply the impression material. Take the inal impression with the prepared individual tray. Remove the tray from the patient's mouth. Image of the set inal impression (with impression coping). Ball analog Insert analogs into the coping embedded in impression. Create the master model.

Open the catalog to page 21
SlimLine - 22

SlimLine Product Catalog & Manual Prosthetic Manual - Indirect Indirect Lab Side Socket spacer. Fabrication of the denture with conventional method. Secure spaces for the female sockets. Assemble the female sockets onto the ball analogs that are embedded in the master model. Apply the resin to the secured area. Position the denture on the master model and wait for it to set completely. Female sockets are placed in the denture. Denture delivery.

Open the catalog to page 22
SlimLine - 23

SlimLine Product Catalog & Manual Prosthetic Manual - Direct Direct Lab Side Socket spacer. Fabrication of the denture with conventional method. Secure spaces for the female sockets. Connect the female sockets to the Mini Ball Abutments in the intraoral. Apply the resin to the secured area. Position the denture in the intraoral and wait for it to set completely. Female sockets are placed in the denture.

Open the catalog to page 23
SlimLine - 24

DENTIUM LONG-TERM CLINICAL DATA

Open the catalog to page 24
SlimLine - 25

over OVER A DECADE OF COMMITMENT TO THE BEST PRODUCTS FOR DENTISTS AND PATIENTS

Open the catalog to page 25
SlimLine - 27

SlimLine Product Catalog & Manual Copyright March, 2015 DENTIUM

Open the catalog to page 27
SlimLine - 28

SlimLine Product Catalog / Manual Specifications are subject to change without notice. Some products listed in this catalog are not available in the market due to pending approval. HEAD OFFICE 504 Gyeonggi R&DB Center, 105 Gwanggyo-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea [443-270] T +82-31-888-5431 F +82-31-888-5430 E-mail biz_mail@dentium.com / www.dentium.com

Open the catalog to page 28

All Dentium catalogs and technical brochures

  1. Regeneration

    26 Pages

  2. Why Dentium

    52 Pages

  3. lab system

    38 Pages

  4. Implantium II

    68 Pages

  5. Paste Stain

    2 Pages

  6. DASK-1402

    12 Pages

Archived catalogs

  1. Regeneration

    24 Pages