Virtuosity is in your hands The plastic burn-out post, a simple and safe method

Simple and safe procedure 1 Preparatory drilling Select the special penetration drill and use it to penetrate the root canal along the entire length of the cutting flutes, minus the depth of the prepared retaining box. If Phase 1 fails to give a result allowing precision drilling (Phase 2) to be started, the canal can be pre-calibrated using the special precalibrating drill (REF C 0214) for all lengths of root post with a diameter of 1 mm at the tip. Precision drilling Inserting the plastic burn-out post Prepare the canal to its final size using the blunt tipped special calibrating drill. Advance...

Before taking the impression Trying in the post before luting If several posts are to be used in a single tooth, check that their heads cannot interfere with each other during insertion. The impression tray must not be allowed to touch the head of any post. Inject the impression material into the retention box and around the root post (or posts). When you remove the impression tray, remove the post from the canal and reposition the head into the impression. After casting in metal, cut a flat all the way along the post, extending this flat by a groove running under the base and along the side...

Creativity in the Art of Dentistry • Perfect fit with the help of the template on the x-ray • Perfect repositioning with the clip head • Colour - coded drills and posts for easy identification Transparent drawing included. You can also order the refill of the posts by 100 pieces per reference. Technical modifications on our products are not subject to notifications. Photo of our instruments are not contractual Special penetration drill Special calibrating drill Burn-out plastic posts Uniclip