^ Dentsply Sirona CAD/CAMCEREC and inLab CAD/CAM Materials dentsplysirona.com Til CdW

Nothing is as valuable as practical experience CEREC and inLab milling units by Dentsply Sirona facilitate the economic and precise production of clinically sound and esthetically high-end prosthetics for the dental practice and laboratory. Users benefit from an ever-increasing variety of materials. All-ceramic restorations fabricated on Dentsply Sirona’s CAD/CAM systems have been proven millions of times over in the past 30 years. Non-precious metal restorations also enjoy growing popularity all over the world. In the development of high-performance materials, Dentsply Sirona places great emphasis...

Zirconium oxide inCoris ZI Zirconium oxide sinter ceramic for frameworks inCoris ZI in a partially sintered state is used to produce crown copings and bridge frameworks with up to two pontics in the anterior and posterior regions. After sintering they will acquire the desired properties: precise dimensions, density, strength, and shade. • High-performance ceramics for large-span and delicately designed frameworks • Outstanding fracture resistance and long service life • Excellent processing quality and biocompatibility • Approved for speed sintering and superspeed sintering with inFire HTC speed...

Zirconium oxide inCoris TZI C Pre-shaded translucent zirconium oxide sinter ceramic Using pre-shaded ceramic blocks and discs saves time because the restorations no longer needs to be dipped in coloring liquid and dried. • Accurate colors using pre-shaded blocks and discs • For critical situations with limited space between restauration and antagonists • No chipping • Speed sintering with inFire HTC speed and conventional sintered in all other sintering furnaces • Can be finalized with customary stains and glazes inCoris TZI C Shade Guide inCoris ZI meso For customized zirconium oxide abutments The...

Zirconium oxide CEREC Zirconia CEREC SpeedGlaze CEREC SpeedGlaze is a spray for glazing full-contour ceramic restorations. Spraying applies a glass powder layer to the surface that is melted in the subsequent firing cycle. The spray has been optimized for the CEREC SpeedFire workflow, but can also be used for all other restorations made from Dentsply Sirona ceramic blocks with the CEREC or inLab system.

Feldspar ceramics CEREC Blocs C Enamel-like for inlays, onlays, veneers, and full crowns This material guarantees excellent shade matching for restorations with the remaining tooth structure with a clinical survival rate of 90% after 10 years.* • Abrasion properties similar to natural enamel • High translucency with chameleon effect • Very good polishability (making it the ideal and fastest solution for chairside applications) • Classical shades A1C to A3-5C + Bleach 2C CEREC Blocs Shade Guide C The Shade Guide for CEREC Blocs C and CEREC Blocs C PC contains 11 different color sample plates made...

Sintering metal inFire HTC speed — the fastest sintering furnace inCoris CC and inCoris CCB For NPM restorations The majority of all restorations fabricated around the world are still made of non-precious metal (NPM). inCoris CC (block) and inCoris CCB (discs) are sintering metals based on a CoCr alloy that, like the well-known zirconia process, is first milled while oversized and then compacted by dense sintering in a furnace in an argon gas atmosphere (inFire HTC speed with Superspeed + Metal). • Easy, clean and fast • Homogeneous material quality with uniform shrinkage and without deformations,...

Polymers CEREC Guide Bloc + inCoris PMMA guide For the production of surgical guides The basis is the integrated implant planning system by Dentsply Sirona that works by superimposing optical impression data and a suggested prosthetic design on 3D X-ray data. The implant planning file is used for the construction of the drilling template in the CEREC or inLab CAD software for defining drilling direction and depth. Subsequently, the restoration is produced in-house using the CEREC or inLab production unit. • Convenient in-house production • Individual characterization and milling from a bloc or disc •...

Implant-supported restorationsSirona TiBase ScanPost For custom abutments TiBase is the titanium base from Dentsply Sirona CAD/ CAM. It is available for different implant systems and diameters and is provided in a set complete with an abutment screw. It facilitates an economical workflow for the in-house production of custom abutments: • Accurate digital acquisition of the implant position by the scanbody: extraorally on the model or intraorally • Abutment design using inLab or CEREC software • Fabricating the mesostructure (e.g., from inCoris ZI meso) or the abutment crowns from a meso block (e.g.,...

CEREC Optispray Precision at your fingertips In combination with the CEREC Bluecam intraoral camera, CEREC Optispray is needed in order to take an intraoral optical impression. A highlight in dental stone In combination with the inEos Blue scanner or the CEREC Bluecam, the scannable CEREC Stone BC superhard dental stone (class IV) ensures outstanding precision in model scanning. • Developed exclusively for use with the CEREC Bluecam • Optimized optical properties such as brightness and contrast • Powder-free application

Subject to technical changes and errors in the text, Order No. A91100-M43-C012-01-7600, Printed in Germany, Dispo No. 04605, WS 0217 V0 Dentsply Sirona Sirona Dental Systems FabrikstraBe 31, 64625 Bensheim, Germany dentsplysirona.com Procedural Solutions Preventive Restorative Orthodontics Endodontics Implants Prosthetics Enabling Technologies CAD/CAM Imaging Treatment Centers Instruments