12 anatomically shaped volar plates Multiple screw options for fixed-angle support to articular surface Combi holes in plate shaft allow locking or compression fixation ® Instruments and implants \rf/ approved by the AO Foundation

2.4 mm LCP Volar Column Distal Radius Plates Features – Anatomically contoured volar distal radius plates – Multiple locking screw options in head of plate provide fixation of the radial and intermediate columns – Choice of 8- or 9-hole head configurations – Available left or right, with 3-, 4-, or 5-hole shaft length – Low plate and screw profile minimizes potential for tendon and soft tissue irritation – Polished surface and rounded edges minimize potential for tendon adhesion – Combi holes in plate shaft allow locking screw fixation with angular stability in the threaded section, or compression...

Screw Trajectories in 2.4 mm LCP Volar Column Plates* * Note: plate with 9 head

Volar Plate Placement and Screw Trajectory Comparison Extra-articular volar plate Volar column plate Synthes 2.4 mm LCP Volar Column Distal Radius Plates Juxta-articular volar plate

Screws Used with the 2.4 mm LCP Volar Column Distal Radius Plates Stainless Steel and Titanium 2.4 mm Locking Screws, self-tapping, with StarDrive recess – Threaded, conical head locks securely into the threaded holes in the plate to provide angular stability – Locked screws allow unicortical screw fixation and load transfer to the near cortex – 6 mm to 30 mm lengths (2 mm increments) – StarDrive recess mates with self-retaining screwdriver and improves torque transmission – Self-tapping tip Note: For information on fixation principles using conventional and locked plating techniques, please...

Plates with 8 head holes Plates with 9 head holes Left Right Note: Product numbers beginning with "2" are 316L stainless steel. Product numbers beginning with "4" are CP titanium. Synthes 2.4 mm LCP Volar Column Distal Radius Plates

60.1 10.039 2.4 mm LCP Volar Column Distal Radius Plate Implants 2.4 mm LCP Volar Column Distal Radius Plates Stainless Head Shaft Length Steel Titanium Holes Holes (mm) Also Available 105.51 5 2.4 mm LCP Distal Radius Plate Instrument and Implant Set 145.515 2.4 mm Titanium LCP Distal Radius Plate Instrument and Implant Set 323.035 1.8 mm Threaded Drill Guide, short Note: For additional information, please refer to package insert.

Synthes (USA) 1302 Wrights Lane East West Chester, PA 19380 Telephone: (610) 719-5000 To order: (800) 523-0322 Fax: (610) 251-9056 © 2007 Synthes, Inc. or its affiliates. All rights reserved. Combi, LCP and Synthes are trademarks of Synthes, Inc. or its affiliates.