Air Power Line II. Air driven power tool system for orthopedics and traumatology. High ­performance Precise cutting This publication is not intended for distribution in the USA. Instruments and implants approved by the AO Foundation.

High Performance and Torque for Drilling and Reaming Air Reamer/Drill II –– High-performance motor for demanding applications (200W/20Nm) –– Attachments for most commonly used reaming systems –– Attachments for optimal speed during drilling (0 – 930 rpm) and reaming (0 – 340 rpm) –– Ergonomic quick coupling system –– Cannulation B 4.0 mm Quick coupling for guide pins B 1.5 to 4.0 mm For other attachments see Ordering Information. AO/ASIF quick coupling Hudson quick coupling Drill chuck with key Quick coupling for DHS/DCS® triple ­reamers Trinkle quick

Precise Cutting with Special Saw Blades Air Oscillator –– Stable locking of the saw blade permits firm positioning and precise cuts –– Sagittal and axial positioning of the saw blade for anatomically adapted access –– Wide selection of high-quality saw blades for traumatology and prosthetics –– Frequency of oscillations: –– 0–14 000 1/min; saw blade deflection 4.5º Different teeth design of oscillating saw blades for different indications –– Precise –– Optimised for high cutting performance –– Precise –– Optimised for sparing soft tissues Detailed ordering information on saw blades for the Air...

Precise Cutting with Special Saw Blades Air Reciprocator –– Precise cuts, e.g. for modeling of the ­tibial plateau –– Axial positioning of the saw blade for anatomically adapted access –– „Click-in“ saw blade assembly –– Frequency of oscillations: –– 0–14 000 1/min; stroke 4 mm Detailed ordering information on saw blades for the Air Power Line II system can be found in the brochure “Large Bone Saw Blades” (036.001.681). Quality based on experience Comprehensive service Synthes has been successfully developing and producing power tool systems for use in traumatology and prosthetics for over 30...

Ordering Information Power Tools 530.780 AO/ASIF Quick Coupling for Reamers, for Power Line 530.750 AO/ASIF Quick Coupling, for Power Line 530.760 Quick Coupling for DHS/DCST Triple Reamers, 530.730 Drill Chuck (930 1/min), with Key, for Power Line 530.732 Drill Chuck (340 1/min), with Key, for Power Line 510.191 Spare Key for Drill Chuck, clamping range up to B 7.3 mm 530.731 Drill Chuck, keyless, for Power Line 510.790 Quick Coupling for Guide Pins B 1.5 to 4.0 mm 530.782 Hudson Quick Coupling (340 1/min), for Power Line 530.792 Hudson Quick Coupling (930 1/min), for Power Line 530.783 Trinkle...

This publication is not intended for distribution in the USA. © DePuy Synthes Power Tools, a division of Synthes GmbH. 2016.  All rights reserved.  036.000.135 DSEM/PWT/0715/0073(1) 03/16