Dermite foto X
2Pages

For how to attach Foto X to your camera, or to the Olympus M10 Mark III, refer to the back panel. Overview The Foto X Spacer can be turned clockwise and counterclockwise to adjust focus. For most uses the Spacer should be adjusted to the -0- position such that the two white Focus Marks are aligned. At this Spacer position the camera lens' auto-focus system will allow for clear imaging of most dermoscopic features. When using the Foto X visually, or when imaging deeper crevices, it may be necessary to adjust the Spacer position inward or outward from this -0- mark. Polarization Power on the Foto X by tapping the Power Button. Foto X defaults to polarized lighting mode every time it is turned on. Tapping the Power Button again toggles between polarized lighting (24 LEDs on) and non-polarized lighting (8 LEDs on). Polarized lighting allows viewing of deeper skin features, while non-polarized lighting is for viewing superficial skin features. Brightness Adjustment Lighting can be adjusted between four brightness levels by tapping the + or - on the Brightness Button. For typical use, the #2 or #3 brightness level provides enough light while prolonging battery life. The Foto X remembers the most recently used brightness setting. Faceplate The Faceplate can be removed by unsnapping at the Fingernail Notches at the end of the spacer. This is useful for non-contact imaging, such as when imaging lesions where blanching of blood vessels is of concern. The glass faceplate can be reinstalled by snapping back into place. IceCap® The Foto X is compatible with disposable IceCaps for infection control. To use, push an IceCap over the Spacer with the Faceplate installed. To remove and dispose, simply pull off. Charging To charge your Foto X, plug the USB C cable into the charging port, and the other end of the USB cable into any USB port or USB charger (not included). The four-level charge indicator illuminates with one to four LEDs to show approximate battery life remaining while the Foto X is in use and similarly, indicates approximate charge time remaining while charging. Attaching Foto X to Camera Option 1: Threaded Connection Foto X is set up to thread directly onto the Olympus camera lens using its integral 37mm filter thread. Thread it onto the camera by turning the Foto X clockwise against the camera lens. Option 2: Magnetic Connection Alternatively, you can magnetically attach Foto X to your camera lens, allowing you to capture dermoscopic and clinical photos (without Foto X attached) in quick succession. This setup requires using the included 37mm Magneti-Connect™ (mC) adapter and Ring Adapter (RA). Thread the 37mm MagnetiConnect adapter onto the camera lens, and thread the Ring Adapter onto the Foto X. The Ring Adapter protects the 37mm threads on the FOTO X and aligns the Foto X concentrically with the camera lens when connected magnetically MagnetiConnect adapters for camera lenses with larger filter thread diameters are available from 3Gen or your 3Gen dealer. Simply refer to the filter thread diameter marked on the lens cap (e.g. 52mm). ® mlDerrnLite and 3Gen are registered trademarks of 3Gen, Inc. | 31521 Rancho Viejo Road | Suite 104 San Juan Capistrano, CA 92675 | U.S.A. | Tel. +1-949-481-6384 | Fax +1-949-240-7492 E-Mail: info03geninc.com | www.dermlite.com | ©2019 by 3Gen, Inc. | All rights reserved. REF A DLFX-1711 | Patents/Trademarks: www.dermlite.com/patents DermuTe FotoX QuickStart Guide Suggested Settings for Olympus M10 Mark III Brightness Button (not shown) Power Button Charge Indicators Fingerna Notch Charger Port (not shown) Focus Marks

Suggested Settings for Olympus M10 Mark III Shooting Mode: Program (P) Set the shooting mode to Program (P) by turning the Mode Dial to [P]. In Program [P] mode, the camera automatically sets the optimal aperture and shutter speed while still allowing you to control other aspects of the shot. While [AUTO] and other shooting modes can be used with the FOTO X, Program Mode offers the best balance between ease of use while maintaining some control over the camera. Optical Zoom Setting Turn the Zoom Ring on the camera lens to adjust optical zoom. Setting your zoom lens to 28mm focal length...