Design-Aire SL-EC

Design-Aire SL-EC

Product catalog summary
Overview
The Design-Aire SL-EC is designed for energy-conscious users, featuring Electronically Commutated (EC) motors that consume less energy and generate less heat at lower speeds compared to traditional AC motors. These units are cost-effective, with energy savings offsetting the initial cost within two years of typical use. They are compatible with computerized building controls.

Key Features
  • Easy Installation: The unit's 11.5” height and lightweight housing facilitate easy ceiling installation. It includes a 3-prong electrical cord for standard 115V outlets.
  • HEPA Duration: Variable speed control extends HEPA filter life by maintaining consistent airflow, reducing the frequency of filter changes.
  • Energy Efficient: Each unit uses a maximum of 1.0 amps.
  • Convenient Connections: A 115V duplex outlet in the filter housing allows up to 10 units to connect to a single 15-amp circuit.

Standard Features
  • HEPA filter with 99.99% efficiency at 0.3 microns.
  • Uniform airflow across the filter face.
  • Durable, lightweight aluminum housing.
  • Disposable, quick-change pre-filters rated MERV 7.
  • Noise levels below 64 dBA.
  • Duplex electrical outlet, 15A, 115V.
  • 15' power cord, 115V – no hard wiring required.
  • Available sizes: nominal 2’x2’, 2’x3’, and 2’x4’.

Optional Features
  • Painted Aluminum or Stainless Steel housing.
  • ULPA filter with 99.9995% efficiency at 0.12 microns.
  • HVAC collar connections.
  • 2" pleated pre-filter instead of standard 1".
  • Minihelic Gauge for monitoring filter loading.
  • Sound Insulation Package.
  • Suspension Package.
  • Drywall Installation Flange.
  • Tamper-Proof Speed Control Cover.
See more

Catalog excerpts

Design-Aire SL-EC-1

Design-Aire SL-EC The Design-Aire SL-EC is the model for the energy conscious user. These fan-filter units feature Electronically Commutated motors that use less energy and create less heat when they are set to run at lower speeds, in contrast to the AC motors that run at maximum energy output regardless of the speed setting. The energy savings these units afford make up for the additional cost within 2 years of typical operation. The Electronically Commutated motors also allow these units to be used in facilities where computerized building controls exist. Standard Features Optional Features Easy Installation The 11.5” height and light-weight housing of these units make them easier to slide into ceilings. The 3prong electrical cord allows them to be plugged into standard 115V outlets. High Efficiency Particulate Air (HEPA) filter rated 99.99% efficient at 0.3 microns HEPA Duration The variable speed control helps increase HEPA filter life by allowing the motor speed to be increased as the loading on the filter increases. This keeps the airflow consistent and results in fewer filter changes. Disposable, quick-change pre-filters, rated MERV 7 2" pleated pre-filter in place of standard 1" Less then 64dba noise levels Minihelic Gauge, to monitor loading on filter Energy Efficient Each unit only uses a maximum of 1.0 amps. Convenient Connections A 115V duplex electrical outlet located in the filter housing allows up to 10 units to be connected to and run from one 15-amp circuit. Uniform airflow across filter face Durable, light-weight aluminum housing Painted Aluminum or Stainless Steel housing Ultra Low Penetration Air (ULPA) filter rated 99.9995% efficient at 0.12 microns HVAC collar connections Duplex electrical outlet, 15A, 115V Sound Insulation Package 15' power cord, 115V – no hard wiring required! Suspension Package Drywall Installation Flange Tamper-Proof Speed Control Cover Click here to open a PDF of the Design-Aire SL-EC 115V cut sheet. Click here to open a PDF of the Design-Aire SL-EC 230V cut sheet. Click here to open a PDF of the Design-Aire SL Transition cut sheet. 02-02-2016 Call Toll Free: (888) 636-8609

 Open the catalog to page 1

All Design Filtration Microzone catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.