Design-Aire SL-RSR

Design-Aire SL-RSR

Product catalog summary
Overview: The Design-Aire SL-RSR is an advanced fan-filter unit designed for clean rooms, featuring a Room Side Replaceable (RSR) HEPA filter. This design is ideal for environments with limited ceiling access, allowing for easy filter replacement and servicing from within the clean room.
Key Features:
  • Room Side Replacement: Enables servicing and filter changes without removing the unit from the ceiling.
  • Easy Installation: The unit's 12.5” height and lightweight housing facilitate easy ceiling installation. It includes a 3-prong electrical cord for standard 115V outlets.
  • HEPA Duration: Variable speed control extends HEPA filter life by adjusting motor speed as filter loading increases.
  • Energy Costs: Operates at a maximum of 2.16 amps.
  • Convenient Connections: A 115V duplex outlet in the housing allows up to 5 units to connect to a single 15 amp circuit.
Standard Features:
  • Gel seal, room side replaceable HEPA filter with 99.99% efficiency at 0.3 microns.
  • Uniform airflow across the filter face.
  • Durable, lightweight aluminum housing.
  • Variable speed control provided loose with the module.
  • Disposable, quick-change pre-filters rated MERV 7.
  • Noise levels below 64 dBA.
  • Duplex electrical outlet, 15A, 115V with a 15' power cord.
  • Available sizes: nominal 2’x2’, 2’x3’, and 2’x4’.
Optional Features:
  • Painted Aluminum or Stainless Steel housings.
  • Ultra Low Penetration Air (ULPA) filter with 99.9995% efficiency at 0.12 microns.
  • HVAC collar connections.
  • 2" pleated pre-filter option.
  • Minihelic Gauge for monitoring filter loading.
  • Sound Insulation Package.
  • Suspension Package.
  • Drywall Installation Flange.
  • Factory-installed speed control.
  • 230V operation.
See more

Catalog excerpts

Design-Aire SL-RSR-1

Design-Aire SL-RSR The Design-Aire SL-RSR takes our slim line fan-filter unit to the next level of convenience by replacing the standard HEPA filter with a Room Side Replaceable HEPA filter. Room Side Replaceable filters are most desirable for clean rooms where there is limited or no ceiling access after installation. In addition to easy filter replacement, the Design-Aire SLRSR also allows access to the electrical components of the unit from within the clean room for easy servicing. Key Features Room Side Replacement No need to remove these units from the ceiling for servicing or filter changes. Easy Installation The 12.5” height and light-weight housing of these units make them easier to slide into ceilings. The 3prong electrical cord allows them to be plugged into standard 115V outlets. HEPA Duration The variable speed control helps increase HEPA filter life by allowing the motor speed to be increased as the loading on the filter increases. Energy Costs Uses a maximum of 2.16 amps. Convenient Connections A 115V duplex electrical outlet located in the filter housing allows up to 5 units to be connected to and run from one 15 amp circuit. Standard Features Optional Features Gel seal, room side replaceable, High Efficiency Particulate Air (HEPA) filter rated 99.99% efficient at 0.3 microns Uniform airflow across filter face Durable, light-weight aluminum housing Painted Aluminum or Stainless Steel housings Ultra Low Penetration Air (ULPA) filter rated 99.9995% efficient at 0.12 microns HVAC collar connections Variable speed control, supplied loose with module not installed 2" pleated pre-filter in place of standard 1" Disposable, quick-change pre-filters, rated MERV 7 Minihelic Gauge, to monitor filter loading Less then 64dba noise levels Sound Insulation Package Duplex electrical outlet, 15A, 115V Suspension Package 15' power cord, 115V – no hard wiring required Drywall Installation Flange Factory install of speed control Click here to open a PDF of the Design-Aire SL-RSR 115V cut sheet. Click here to open a PDF of the Design-Aire SL-RSR 230V cut sheet. Click here to open a PDF of the Design-Aire SL Transition cut sheet. 02-02-2016 Call Toll Free: (888) 636-8609

 Open the catalog to page 1

All Design Filtration Microzone catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.