Design-Aire SL
1Pages

Design-Aire SL The Design-Aire SL is our most popular fan-filter unit. The new “slim line” housing was designed to fit into tight ceiling spaces, where our older model and many competing models could not be installed. Our entire series of Design-Aire fan-filter units come standard with many beneficial features. Standard Features Optional Features Easy Installation The 11.5” height and light-weight housing of these units make them easier to slide into ceilings. The 3prong electrical cord allows them to be plugged into standard 115V outlets. High Efficiency Particulate Air (HEPA) filter rated 99.99% efficient at 0.3 microns HEPA Duration The variable speed control helps increase HEPA filter life, by allowing the motor speed to be increased as the loading on the filter increases. This keeps the airflow consistent and results in fewer filter changes. Disposable, quick-change pre-filters, rated MERV 7 2" pleated pre-filter in place of standard 1" Less then 64dba noise levels Minihelic Gauge, to monitor filter loading Energy Costs Each unit only uses a maximum of 2.16 amps. Painted Aluminum or Stainless Steel housings Ultra Low Penetration Air (ULPA) filter rated 99.9995% efficient at 0.12 microns Uniform airflow across filter face Durable, light-weight aluminum housing HVAC collar connections Duplex electrical outlet, 15A, 115V Sound Insulation Package 15' power cord, 115V – no hard wiring required Suspension Package Drywall Installation Flange Tamper Proof Speed Control Cover Convenient Connections A 115V duplex electrical outlet located in the filter housing allows up to 5 units to be connected and run from one 15 amp circuit. Click here to open a PDF of the Design-Aire SL 115V cut sheet. Click here to open a PDF of the Design-Aire SL 230V cut sheet. Click here to open a PDF of the Design-Aire SL Transition cut sheet. 02-02-2016 Call Toll Free: (888) 636-8609