DUOMAT 8
4Pages

DUOMAT 8 Page 1/4 - stand of 08/2021 Versatile double drive for nursing and hospital beds The DUOMAT 8 is the successor of the DUOMAT 7. The double drive is equipped with SMPS and plug-in power cord. This means the device is suitable for global use. The housing not only has a modern design, but also delivers increased mechanical stability. Other advantages: The DUOMAT 8 can be easily mounted and has a high protection level. Thanks to its characteristics, the double drive is perfectly suited for combined head and back section adjustment. The adjustment load is up to max. 4,500 Newton per side. The adjustment speed is up to max. 6.5 mm/sec - depending on the drive configuration at a constant 24/29 V DC and no load. Many configuration options The special feature of the DUOMAT 8: Its many configuration options make the drive even more efficient and versatile. The configuration options include: electrical reset function (9V battery), rechargeable battery, mains cut-off mechanism, synchronous control unit, externally-mounted floor lighting system, Hall sensor, microprocessor controlled FURNIBUS and toroidal transformer with 155 VA. Advantages at a glance • Compact and stable construction • Integrated SMPS • Perfectly suited for combined head and back section adjustment • Easy assembly • High IP protection class • Load capacity: max. 4500 N on each side (for safety reasons, no pull force) • Adjustment speed: max. 6.5 mm/sec. * • Power unit type: SMPS • Integrated battery holder. Anti-plug-removal device • Equipment options: electrical retracting function (9 V block battery), rechargeable battery operation, mains cut-off, synchronous control unit, floor lighting system fittable from outside, Hall sensor, microprocessor control FURNIBUS, toroidal transformer 155 VA * depending on drive configuration at constant 24/29 V DC without load Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness. DewertOkin GmbH • Weststraße 1 • 32278 Kirchlengern Phone: +49 (0)52 23 / 9 79 -0 • Fax: +49 (0)52 23 / 7 51 82 • Email: info@dewert.de • In

fidA DEWERT A DewertOkin Technology Brand DUOMAT 8Page 2/4 - stand of 08/2021 Standard configurations Performance data Load capacity Performance data Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness.

Fitting dimension axis diameter: 34 mm Control unit microprocessor control "FURNIBUS", synchronous control unit Position feedback Hall sensor Transformer / Transformer type toroidal transformer 155 VA Quick release / Retracting function 3 electrical retracting function (9 V block battery) Equipment options rechargeable battery operation, floor lighting system fittable from outside 1 depending on the drive configuration and the control components which are used 2 (example, depending on control unit type) 3 Retracting function: The clutch of the lowering function must be open during the...

fii DEWERT A DewertOkin Technology Brand Page 4/4 - stand of 08/2021 Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness.