MEGAMAT 4 Page 1/4 - stand of 08/2021 Smooth-running and powerful The advantages of the MEGAMAT 4 include its high level of performance, its compact and stable construction and its distinct smooth operation. The equipment also includes the manual emergency lowering. Its push force is as much as 6,000 Newton and its pull force is as much as 4,000 Newton. Its adjustment speed is 24 mm/s and its stroke length is up to max. 500 mm. Because the device is easy to clean, it is perfectly suited for demanding medical applications. Customised to the customer Thanks to its many configuration options, the MEGAMAT 4 is ideal for adapting to your individual requirements. On request, we can integrate a die-cast zinc lift pipe clevis, safety limit switch, additional limit switch, safety spindle nut and a Hall sensor. Advantages at a glance Compact and stable construction Low noise level Manual emergency lowering Easy to clean Many configuration options • Load capacity: max. 6000 N push / max. 4000 N pull • Adjustment speed: max. 24 mm/sec. * • Stroke length: max. 500 mm • Equipment options: stroke pipe clevis made of die cast zinc, safety limit switch, additional limit switch, safety spindle nut, Hall sensor * depending on drive configuration at constant 24/29 V DC without load Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness. DewertOkin GmbH • Weststraße 1 • 32278 Kirchlengern Phone: +49 (0)52 23 / 9 79 -0 • Fax: +49 (0)52 23 / 7 51 82 • Email: [email protected] • Internet: http

fidA DEWERT A DewertOkin Technology Brand Page 2/4 - stand of 08/2021 Standard configurations Performance data Load capacity Adjustment speed 1 Stroke length Fitting dimension (B) 2 Duty cycle Motor voltage Components Limit switch Stroke pipe clevis Gear clevis 2/18 min. or 10 %, max. 5 switching cycles per minute with micro switch drill hole: 10/12 mm recess: 5/8/10 mm die cast zinc adjustable (4 x 90°) drill hole: 10/12 mm recess: 8 mm Stroke pipe Guidance profile Housing colour Motor connecting line aluminium anodised stepless adjustable aluminium anodised light grey RAL 7035 grey, spiralled,...

1 depending on drive configuration at constant 24/29 V DC without load 2 see technical drawings 3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

tidA DEWERT A DewertOkin Technology Brand Page 4/4 - stand of 08/2021 Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness.