MEGAMAT 5 Page 1/4 - stand of 08/2021 Power and flexibility for patient lifters MEGAMAT 5 users benefit from the high push and pull force of the drive. Its push force is as much as 8,000 Newton and its pull force is as much as 3,000 Newton. Its adjustment speed is 9.5 mm/s and its stroke length up to max. 400 mm (6,000 Newton push force) or 300 mm (8,000 Newton push force). Perfectly suited for lifter applications Further advantages of the MEGAMATS 5 include its compact and stable construction, the optimum price-performance ratio and manual emergency lowering. Thanks to its characteristics, the drive is especially well-suited for lifter applications. Nearly all the optional equipment for the MEGAMAT 2 are also available for the MEGAMAT 5. Advantages at a glance Compact and stable construction High push and pull forces Manual emergency lowering Optimum price-performance ratio Especially well-suited for lifter applications • Load capacity: max. 8000 N push / max. 3000 N pull • Adjustment speed: max. 9.5 mm/sec. * • Stroke length: max. 400 mm (6000 N), max. 300 mm (8000 N) • Equipment options: safety limit switch, additional limit switch, safety spindle nut, Hall sensor * depending on drive configuration at constant 24/29 V DC without load Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness. DewertOkin GmbH • Weststraße 1 • 32278 Kirchlengern Phone: +49 (0)52 23 / 9 79 -0 • Fax: +49 (0)52 23 / 7 51 82 • Email: [email protected] • Internet: http

fidA DEWERT A DewertOkin Technology Brand Page 2/4 - stand of 08/2021 Standard configurations Performance data Load capacity Adjustment speed 1 Stroke length Fitting dimension (B) 2 Duty cycle Motor voltage Components Limit switch Stroke pipe clevis Gear clevis 2/18 min. or 10 %, max. 5 switching cycles per minute with micro switch drill hole: 10/12 mm recess: 5/8/10 mm plastic adjustable (8 x 22.5°) drill hole: 10/12 mm recess: 5/8/10 mm Stroke pipe Guidance profile Housing colour Motor connecting line aluminium max. 6000 N stepless adjustable aluminium untreated light grey RAL 7035 grey, spiralled,...

Quick release / Retracting function 3 mechanical retracting function (LR) up to max. 8000 N (only for push drives), GQR in clevis up to max. 3000 N (only for push- or pull-drives) Equipment options safety limit switch, additional limit switch, safety spindle nut 1 depending on drive configuration at constant 24/29 V DC without load 2 see technical drawings 3 Retracting function: The clutch of the lowering function must be open during the entire downward movement.

tidA DEWERT A DewertOkin Technology Brand Page 4/4 - stand of 08/2021 Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness.