DGM Z-150/220 Low-temperature plasma sterilizer
3Pages

{{requestButtons}}

Catalog excerpts

DGM Z-150/220 Low-temperature plasma sterilizer - 1

Low-temperature plasma sterilizer Low-temperature plasma sterilizer Low-temperature plasma sterilizer DGM Z provides an efficient sterilization solution for heat and moisture sensitive medical equipment in CSSDs, Hospitals, Respiratory and Gastroenterology Endoscopy Clinics. DGM Z is used to sterilize medical equipment and instruments made of heat-sensitive materials: products of synthetic and polymer materials, medical optical systems, medical electric instruments and electrical power cables, rigid endoscopes, ultrasonic medical devices, sensors, medical devices, including ultrasound devices, medical implants and tools for their installation, etc. DGM Z is designed to improve productivity and reduce the risk of work stoppage. The equipment is cost-efficient, user-friendly, safe for health care staff, patients, instruments and environment. The process by-products are non-toxic oxygen and water vapour. DGM Z does not require any special connections for the installation, only electricity. The range of DGM Z low-temperature plasma sterilizers is represented by models: DGM Z-40, DGM Z-150, DGM Z-220 with chamber volumes of 50, 135 and 225 liters, respectively. DGM Z-150/220 DGM Z-150/220 have advanced features for ease of use and quality control including bio-incubator and a foot pedal to facilitate the loading process. The models are also available as pass-through sterilizers for the Central Sterilization Departments with a need for separation of clean and sterile areas. Overview Floor-standing Automatic vertical sliding door(-s) Rectangular chamber, completely made of aluminum Fully automatic controlled 3 integrated sterilization programs - Short program – 30 min - Standard program – 45-65 min - Long cycle time (for long hollow pipes) – 65-75 min • 5,7” color touch screen display indicating in real time the following: - Cycle phases and parameters, both in the numerical and trend form - Anomalies, alarms • Output of sterilization parameters on the built-in printer • Foot pedal • Built-in incubator

Open the catalog to page 1
DGM Z-150/220 Low-temperature plasma sterilizer - 2

Low-temperature sterilization Low-temperature plasma sterilizer Technical data Parameters/Models Cycle Temperature Sterilizing Agent Sterilization Chamber Configuration Total Cycle Time Short Standard Long Depth Width Height Weight Total Chamber Volume Usable Chamber Volume Two-Tiered Shelves DGM Z-220 50- 55°C hydrogen peroxide 58-60% Rectangular Sterilization basket with cover 620 x 250 x 60 mm Sterilization basket with cover 620 x 200 x 60 mm Sterilization basket with cover 460 x 160 x 60 mm Sterilization basket with cover 460 x 80 x 60 mm Sterilization basket with cover 255 x 160 x 60...

Open the catalog to page 2
DGM Z-150/220 Low-temperature plasma sterilizer - 3

Low-temperature sterilization Low-temperature plasma sterilizer DGM Z-40 A compact size low temperature plasma sterilizer with a chamber volume of 50 liter. DGM Z-40 with a movable table can be installed where needed. Automatic door Rectangular chamber, completely made of aluminum 3 integrated sterilization programs Short program – 28 min Standard program – 40 min Long cycle time (for long hollow pipes) – 50 min 5,7” color touch screen display indicating in real time: - Cycle phases and parameters, both in the numerical and trend form - Anomalies, alarms Output of sterilization parameters...

Open the catalog to page 3