*mymedicalexpo

Catalogs
DGP Intelsius GmbH
Amounts of Category A Materials Permitted in Intelsius UN Certified Packaging

Amounts of Category A Materials Permitted in Intelsius UN Certified Packaging

Product catalog summary

Overview: This document outlines the permitted amounts of Category A materials that can be transported using Intelsius UN Certified Packaging systems. These systems are specifically tested with glass primary receptacles and comply with IATA Dangerous Goods Regulations (DGR), Edition 65.

Specifications: The packaging systems include an additional 'U' in their designation (4GU), indicating compliance with section 6.5.4.1.6 of the IATA DGR. This section allows primary receptacles of any type to be assembled within a secondary packaging and transported without testing in the rigid outer packaging, provided the total combined gross weight of primary receptacles does not exceed half the gross weight used for the drop test.

Permitted Amounts: The document lists the maximum permitted amounts of liquid and total mass for various Intelsius packaging systems:

PathoPak 800mL: ≤ 21 mL liquid, 53.0 g total
PathoPak 1L: ≤ 25 mL liquid, 62.5 g total
PathoPak 2L: ≤ 50 mL liquid, 105.5 g total
PathoPak 3L: ≤ 60 mL liquid, 137.5 g total
PathoShield 4: ≤ 15 mL liquid, 35.5 g total
BioTherm 7: ≤ 21 mL liquid, 39.0 g total
BioTherm 10*: ≤ 60 mL liquid, 144.0 g total
BioTherm 14: ≤ 63 mL liquid, 140.0 g total
BioTherm 15: ≤ 63 mL liquid, 140.0 g total
BioTherm 30: ≤ 126 mL liquid, 279.0 g total

Note: BioTherm 10 is not currently UN certified in European regions.

Conclusion: The document provides critical information on the limitations and specifications for transporting Category A materials using Intelsius packaging systems, ensuring compliance with international regulations.

Catalog excerpts

Amounts of Category A Materials Permitted in Intelsius UN Certified Packaging -1

Intelsius’ Category A packaging systems are tested with glass primary receptacles. These systems carry an additional letter “U” within the packaging designation (4GU) indicating a special packaging conforming to the requirements of 6.5.4.1.6 of IATA Dangerous Goods Regulations (DGR), Edition 65. Section 6.5.4.1.6 of IATA DGR states: “Primary receptacles of any type may be assembled within a secondary packaging and transported without testing in the rigid outer packaging...” Section (b) of 6.5.4.1.6 of IATA DGR states: "... the total combined gross weight of primary receptacles must not exceed one half the gross weight of primary receptacles used for the drop test..." IATA Dangerous Goods Regulations (DGR) 2024, Edition 65 The amounts listed below are the permitted amounts of Category A materials suitable for transportation as stipulated by the certification body. *BioTherm 10 is not currently UN certified in European regions Richard Merchant Product Manager, APAC DGP Intelsius Ltd

Open the catalog to page 1

All DGP Intelsius GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list