• EPS 14 Lid (1 unit)
• Dry Ice (8.5 kg)
• Payload (1 unit)
• EPS 14 Base (1 unit)
• BioTherm 14 Outer (1 unit)

The mass of dry ice used in testing is detailed in section 2.2.

1. Prepare the payload according to specifications and ensure compliance with regulations if classified as dangerous goods.
2. Pour approximately 0.9 kg of pelleted dry ice into the EPS 14 base.
3. Place the payload on top of the dry ice.
4. Pour the remaining dry ice into the EPS 14 base, ensuring the payload is fully surrounded.
5. Securely fit the EPS 14 lid, ensuring the gasket engages.
6. Close and secure the BioTherm 14 Outer lid and apply necessary shipping labels.

The BioTherm 14 Dry Ice is now ready for shipment.

The amount of dry ice required depends on the duration needed to maintain specific temperatures. An initial mass of 0.9 kg should be placed in the system before the payload for all durations.

For maintaining -60°C:

Dry ice fills are calculated using loss rates determined from qualification testing with an 8.5 kg fill.