Confirmation of the recyclability of packaging according to EN 13430 DGP Intelsius GmbH 64291 Darmstadt Green Therm 23 DI with uncoated liner Document number: Functional packaging unit Cardboard box with insulation Packaging weight: Material fraction collection: Waste paper Material fraction recycling: The total mass share available for recycling in the countries mentioned below is 100 % This evaluation is based on the test standard EN 13430:2004 (D) analogue annex C, table C.2. The evaluation result is documented on two pages and is valid for two years after issue. It loses its validity in the event of constructive changes to the components under investigation. This confirmation is valid in following countries (designation according to ISO 3166 ALPHA-3): x Dr.-Ing. Wolf Karras Material scientist

Date, Examinant part of the packaging, which is made by hand or using simple mechanical means, the separability is not optionally applied specified for use as proof of material recyclability according B.2.2; if no recycling process exists then N/A for "not applicable" according CR13688; disclosures not mandatory if regulated in specifications