Performance Ganzfeld Dome “Any color, any intensity, any duration” Features Advanced flash capabilities • • • ColorDome™ has a trillion-to-1 luminance range Flash duration from nanoseconds to hours Any color background from RGB and amber LEDs Easy to use, ultimate performance • • • • Self-calibrating Full electronic color control Flash or flicker stimuli in any color & duration Multiple desktop and cart mount options Disease diagnostics and monitoring Research and development Drug discovery and screening Clinical trials Neuro-ophthalmology ColorDome shown mounted on optional Slider table stand Industry leading protocols Any color flash: from RGB & amber LEDs; UV LED also available Red (627 nm), Amber (590 nm), Green (530 nm), Blue (448 nm) LED sets produce 9 order-of-magnitude luminance range Flash duration from nanoseconds to hours Proprietary CIE compensation yields ultra-stable luminance & color output Maximum white flash >60 cd·s/m2 (6x ISCEV standard maximum flash) On/off flashes of any duration, waveforms including sine & exponential, arbitrary wavetable Calibrated in photopic and scotopic units as well as Trolands User defined color and luminance stimuli Auto calibration Xenon flash Xenon flash calibrated from 0.001 cd·s/m2 to 2,000 cd·s/m2 Triple tube for wide range and linearity Auto calibration monitors each flash & adjusts flash duration in real-time Integral filter holder for adding customer filters if required Max white flash 2,000 cd·s/m2 Calibrated in photopic and scotopic units as well as Trolands Capable of double flashes including “double bright flash” protocol All ISCEV full-field tests C-wave Dark-adapted 30.0 ERG Dark-adapted long wavelength Direct current ERG Double flash ERG Early receptor potential Electro-oculography (EOG) Flash VEP Light-adapted luminanceresponse series - Photopic On-Off - Photopic negative response - Saturated a-wave series - Scotopic threshold response - S-cone ERG - Dark adapted Red Flash With upgrade modules: - Pupillometry - Dark Adaptometry - DiagnosysFSTÒ Overall flash Flash luminance range from 10-8 to 2,000 cd·s/m2 Anywhere within this range, luminance can be changed with no less than 1% resolution Not all products are available in every country and their use may be limited by local regulations. Contact your local Diagnosys

Background illumination Any color background (from RGB and amber LEDs) 6 order-of-magnitude luminance range Calibrated luminance output in cd/m2 Calibrated in photopic and scotopic units Colors can be created using CIE coordinates or color picker ColorDome shown mounted on optional power lift cart EOG test 9 red EOG LEDs spanning 60˚ as well as the standard 30˚ Adjustable intensity and cycle time Can be cycled in square wave mode or sinusoidal mode Configurable to have audible beep at the start of every cycle and sweep Backgrounds up to 500 cd/m2 white for non-dilated pupils Other features Infrared...