HLX-SENS Enviromental Monitoring & CONTROL
11Pages

ENVIRONMENTAL MONITORING & CONTROL

HLX-Sens TRANSMITTER DISPLAY METER CONTROLLER HLXSens is a new line of modern industrial devices, which integrates transmitters, displays, meters and controllers functionalities. Using the latest miniaturisation technologies these compact devices are able to be equipped with two independent universal inputs, two binary or two analogue outputs, as well as communication port RS-485 with Modbus protocol. Within the HLXSens range, models 200 and 400 have integrated temperature and relative humidity sensor. As well as an exceptionally wide working temperature range (-30 ÷ +120°C) they are also...

HLX-Sens The primary functionality of HLXSens is taking measurements. Depending on needs and requirements, this compact device is equipped with top quality, precise and stable temperature and humidity sensors and/or with universal inputs that are standard for industrial automation. Thanks to its equipment the device guarantees a very high level of measurement reliability. Both version of probes - integrated and cable ones - are made of stainless steel. The sensors are protected with a replaceable PTFE or stainless steel mesh filter. The filter type is adjusted to a particular version of the...

Main features 1 or 2 binary / analogue outputs Acoustic and visual alarm indication Outputs state indication Personalised graphic units Infrared receiver Local keypad or PC software for set-up Stainless steel 316L probes 1 or 2 universal inputs Temperature and humidity measurements up to 120°C and 100% RH 1 or 2 measuring channels available, with or without a probe Integrated, separable or cable probes made of 316L steel, used for temperature or temperature and humidity measurements Replaceable filter made of PTFE or 316L mesh, 25 µm Universal inputs of a very wide spectrum of analogue...

A wide range of possibilities Thanks to the universal device construction it is possible to apply 1 or 2 independent measuring channels. The most common type equipped with a probe (integrated or cable one) measures temperature or temperature and humidity in the sensor area, or on the installation in case of choosing cable probes. Regardless of the above, in case of a two-channel device a user can connect an external sensor by means of another, universal measuring input. If there is no need to apply constructions equipped with probes, both measuring inputs in the device can be used to...

Technical data Power supply none or graphic LCD, 128 x 64 points, with backlight radial integrated, length 40 mm, Ø 18 mm, stainless steel 316L, PTFE filter cap radial integrated, length 90 mm, Ø 18 mm, stainless steel 316L, PTFE filter cap radial integrated, length 145 mm, Ø 18 mm, stainless steel 316L, PTFE filter cap Probe parameters Connector & cable type axial integrated, L=200 or 300 mm, Ø 12 mm, stainless steel 316L probe and filter cap gland or 4 pin M12 connector, cable, PUR or TPU covered (operating temp. -30 ÷ +80°C) or TPE covered (operating temp. -30 ÷ +120°C) cable probe L=200 or...

Visualisation & utility software SimCorder Soft Monitoring from anywhere SimCorder Soft communicates with external devices using the RS-485 interface with the Modbus RTU protocol and reads measurement data from the above devices. A computer may be connected directly to the network of devices or via the internet. In case of the latter, an RS-485 Ethernet converter is necessary. This software enables sound and visual alerts (e.g. in case the temperature is too high in the cooler, excessive humidity, insufficient flow etc.). The system can be configured so that each alert evokes a particular...

Accessories Cable probes Ordering: PPQ-612-00-X-X measurement of: 2 : temperature 3 : temperature & humidity Cable probe Ø18, L=90 mm, w/o cable, housing SS 316L, filter FPQ-P350 connector type: 2 : connector, operating temp. -30 ÷ +80°C 4 : connector, operating temp. -30 ÷ +120°C (only for cable connections) Cable probe Ø18, L=90 mm, housing SS 316L, filter FPQ-P350 PPQ-621-XX-X-X Cable probe Ø12, L=200 mm, housing SS 316L, filter from SS mesh 25 µm PPQ-622-XX-X-X Cable probe Ø12, L=300 mm, housing SS 316L, filter from SS mesh 25 µm measurement of: 2 : temperature 3 : temperature & humidity...

Accessories Connection accessories M12 connector, 4-pin, w/o cable for PPQ-612 probes, operating temp. -30 ÷ +80°C M12 connector, 4-pin, cable 3 m, for PPQ-612 probes Ordering: CPX-30 operating temp.: Q : standard: -30 ÷ +80°C, cable TPU covered T : expanded: -30 ÷ +120°C, cable TPE covered Additional accessories SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys...

Ordering QM-XXX-XX-X-X-X-XX-X-10-3-X probe version: 100-00-0 : without probe 211-00-0 : radial, Ø 18 mm, L=40 mm 212-00-0 : radial, Ø 18 mm, L=90 mm 213-00-0 : radial, Ø 18 mm, L=145 mm 421-00-0 : axial, Ø 12 mm, L=200 mm 422-00-0 : axial, Ø 12 mm, L=300 mm 612-00-2 : radial connector, no cable, Ø 18 mm, L=90 mm 612-XX-X : cable, Ø 18 mm, L=90 mm 621-XX-X : cable, Ø 12 mm, L=200 mm 622-XX-X : cable, Ø 12 mm, L=300 mm connector & cable type: 1 : gland, PUR covered, operating temp. -30 ÷ +80°C 2 : connector for Ø 18 mm probe, TPU covered, operating temp. -30 ÷ +80°C 3 : gland, TPE covered,...

Digitron Italia S.r.l. Via ASI Consortile, n° 7 03013 Ferentino (FR) Italia Tel (+39) 0775 392052 Fax (+39) 0775 223835 www.digitron-italia.com info@digitron-italia.it