SEB2000 Automated cleaning station for endoscope reprocessing

MODULE FOR ENDOSCOPES CLEANING IT Traceability of the whole cycle Nr. 5 different washing cycles customizable Irrigation pipes removable and sterilizable by autoclave Automatic water and detergent dosing system Automatic water drain Meet the recommended reprocessing standards and guidelines After every endoscope procedure, an endoscope must be cleaned, disinfected and safely stored ready for its next use. In order to achieve the highest level of disinfection, an endoscope must undergo a rigorous pre-cleaning process to remove any contaminants from its surfaces. SEB 2000 is an automated bench...

COLOURED 7 “ TOUCH SCREEN BARCODE READER PERISTALTIC PUMP LEAK TEST CONNECTION AUTOMATIC FAUCET FOR LOADING WATER AND RINSING CHEMICAL INLET OPTIONAL BARCODE READER SMART DRAIN STEP CONFIRMATION CYCLE TRACEABILITY DOUBLE USB PORT EXTRA DOSING SYSTEM CYCLE TRACEABILITY ETHERNET PORT ( RJ45) CYCLE TRACEABILITY CONTACT LESS SENSOR

LEAK TEST Performed by means of a pump with pressure control and safety valve against over presure. The test is performed at the beginning of the cycle and kept under control for the entire duration of the cycle. WASHING PHASE Automatic irrigation of the water / detergent mixture by means of a high resistance peristaltic pump. CHANNEL DRAINAGE Ensures the removal of residual liquid present in the instrument channels from the previous washing phase INSTRUMENT CONNECTION Wide range of connection systems for each instrument dedicated to leak test, biopsy channel, air and water. CONTROL SYSTEM Monitors...

The operator interface is a 7 "color touch screen display that allows the operator to constantly monitor and view the various phases of the washing cycles in real time. IT TRACEABILITY Full traceability is ensure via a ticket, usb report or .cvs file which identifies the operator, the endoscope, the chronology of the different phases, contact times and products with bath number. AUTOMATIC DOSING DETERGENT Performed by means of a pump, it dosages the right quantity of detergent reducing risks of waste and over dosages damaging for the instrument. Possibility to add an additional dosing pump (...

Reduction of the operator's osteoarticular diseases, in particular carpal tunnel syndrome; High-performance pump for suction and irrigation of canals NO CONTACT BETWEEN THE LIQUID AND THE MECHANICAL PARTS to eliminate any risk of contamination Acoustic and visual signal at each end of step to guide the operator in all treatment phases Complete traceability of washing process by means of printer, USB or PC. Automatic dosing detergent in relation to the dosage water Automatic drain with smart water detection Dinamyc rinsing Custom sink based on customer needs

TECHNICAL DATA Power supply: Voltage range: AC current: Power: Enviroment: Working temperature: Working Humidity: Utilities: Water: Drain MEDICAL DEVICE Class I, according with all. VII Dir. 93 / 42 / CEE EN60601, EN61326-1, EN ISO 14971. SILICON PIPES CUSTOM FITTINGS

DMED is a dynamic and enterprising company complete with all the appropriate knowledge applicable in the field of infection control, cleaning and disinfection, both chemical and thermal in the medical and hospital sector. SPACE FOR SIGNATURE OR DEALER STAMP [email protected] www.dmed.it