We make access in life smart and secure
Open the catalog to page 1dormakaba RTS88 Series - Overhead concealed door closer RTS88 SeriesOverhead concealed door closer Contents 3 Specifications 3 Technical details Application drawings - side load packages 5 Aluminum door and frame - RTS01/RTS02 6 Steel door and frame - RTS03 7 Wood door and steel frame - RTS04 8 Wood door and frame - RTS05 9 Wood door and aluminum frame - RTS06 Application drawings - end load packages 10 Aluminum door and frame, 1" top rail - RTS07-RTS10 11 Aluminum door and frame, 7/8" top rail - RTS11-RTS14 12 Aluminum door and frame, 3/4" top rail - RTS15-RTS18 13 Aluminum door and frame, 5/8"...
Open the catalog to page 290° or 105° maximum opening door swing, trim conditions permitting. Sweep and latch closing speeds are controlled by two noncritical temperature compensating valves to insure constant closing speeds even under the most extreme temperature conditions. A built-in pressure relief valve protects the closer from abuse due to forced closing. A cushion at 90° or 105°, depending on the model selected, helps protect the door, frame, and adjoining structure. Note: Always use an auxiliary stop in conjunction with RTS88 installations. The RTS88 may be used on doors weighing up to a maximum of 250 lb (interior)...
Open the catalog to page 3dormakaba RTS88 Series - Overhead concealed door closer Dual speed closing—Sweep and latch closing speeds are controlled by two non-critical adjustment valves. Sweep area is from 105° to 20°. Latch area is from 20° to 0°. Backcheck—A mechanical backcheck slows the door prior to contact with the cushion. Cushion—An integral cushion is available at 90° or 105°. Always use an auxiliary stop in conjunction with RTS88 installations. Comparison chart RTS88 Series DORMA Since no products are exactly alike, the data on this chart represents our judgment of which products are most similar. Information...
Open the catalog to page 4Aluminum door and frameSide load - Double or single-acting Package RTS01/RTS02 Side load doors are installed by placing the door on the bottom pivot with the door in the closed position. The top of the door has a notch on the interior side which allows access to the clamping block. 2. No. 8563 cover plate (optional) 2. No. 8563 cover plate (optional) Note: Always use an auxiliary stop in conjunction with RTS88 installations.
Open the catalog to page 5dormakaba RTS88 Series - Overhead concealed door closer Package RTS03 contains all of the components required to install an RTS closer in a steel header. Note: Always use an auxiliary stop in conjunction with RTS88 installations.
Open the catalog to page 6Wood door and steel frame Side load - Double or single-acting Package RTS04 Package RTS04 contains the No. 8832 side load arm with channel which was designed specifically for wood door installations. 1. 8532 closer mounting channel Note: Always use an auxiliary stop in conjunction with RTS88 installations.
Open the catalog to page 7dormokobo RTS88 Series - Overhead concealed door closer Package RTS05 contains special brackets and screws for installing the RTS closer in wcxxf headers. Note: Always use an auxiliary stop in conkinctwn wth RTS88 installations.
Open the catalog to page 8Wood door and aluminum frame Side load - Double or single“acting Package RTS06 Package RTS06 contains the No. 8832 side load arm with channel which was designed spedfically for wood door installations. 2. No. 8563 cover plate (optional) Note: Always use an auxiliary stop in conjunchon with
Open the catalog to page 9dormakaba RTS88 Series - Overhead concealed door closer Package RTS07-RTS10 Packages RTS07 through RTS10 are designed for top door rails with 1" deep channels. The door is installed by rotating the closer spindle 90°, then sliding the door into place, perpendicular to the frame. 2. No. 8563 cover plate (optional) 4. No. 8857 tall threshold pivot 2. No. 8563 cover plate (optional) 5. No. 8853 tall floor pivot 2. No. 8563 cover plate (optional) 6. No. 8855 short threshold pivot 2. No. 8563 cover plate (optional) 7. No. 8852 short floor pivot Note: Always use an auxiliary stop in conjunction with...
Open the catalog to page 10Aluminum door and frame - 7/8" top rail End load - Double or single-acting Package RTS11-RTS14 Packages RTS11 through RTS14 are designed for top door rails with 7/8" deep channels. The door is installed by rotating the closer spindle 90°, then sliding the door into place, perpendicular to the frame. 2. No. 8563 cover plate (optional) 4. No. 8857 tall threshold pivot 2. No. 8563 cover plate (optional) 5. No. 8853 tall floor pivot 2. No. 8563 cover plate (optional) 6. No. 8855 short threshold pivot 2. No. 8563 cover plate (optional) 7. No. 8852 short floor pivot Note: Always use an auxiliary stop...
Open the catalog to page 11dormakaba RTS88 Series - Overhead concealed door closer Package RTS15-RTS18 Packages RTS15 through RTS18 are designed for top door rails with 3/4" deep channels. The door is installed by rotating the closer spindle 90°, then sliding the door into place, perpendicular to the frame. 2. No. 8563 cover plate (optional) 4. No. 8857 tall threshold pivot 2. No. 8563 cover plate (optional) 5. No. 8853 tall floor pivot 2. No. 8563 cover plate (optional) 6. No. 8855 short threshold pivot 2. No. 8563 cover plate (optional) 7. No. 8852 short floor pivot Note: Always use an auxiliary stop in conjunction with...
Open the catalog to page 12Aluminum door and frame - 5/8" top rail End load - Double or single-acting Package RTS19-RTS22 Packages RTS19 through RTS22 are designed for top door rails with 5/8" deep channels. The door is installed by rotating the closer spindle 90°, then sliding the door into place, perpendicular to the frame. 2. No. 8563 cover plate (optional) 4. No. 8857 tall threshold pivot 2. No. 8563 cover plate (optional) 5. No. 8853 tall floor pivot 2. No. 8563 cover plate (optional) 6. No. 8855 short threshold pivot 2. No. 8563 cover plate (optional) 7. No. 8852 short floor pivot Note: Always use an auxiliary stop...
Open the catalog to page 13dormakaba RTS88 Series – Overhead concealed door closer Aluminum door & frame – Hinges Offset slide arm—Single-acting Package RTS25 Package RTS25 is templated specifically for aluminum doors hung on 4-1/2" wide hinges. 1 1. RTS Series closer 2. No. 8563 cover plate (optional) 3. No. 8812 slide arm Note: Always use an auxiliary stop in conjunction with RTS88 installations.
Open the catalog to page 142 Pages
20 Pages
2 Pages
14 Pages
12 Pages
12 Pages
2 Pages
17 Pages
69 Pages
16 Pages
2 Pages
20 Pages
16 Pages
8 Pages
8 Pages
12 Pages
20 Pages
28 Pages
24 Pages
168 Pages
2 Pages
8 Pages