Catalogs >
Dortek >
MF5 - Hermetically Sealed Sliding Hospital Door

MF5 - Hermetically Sealed Sliding Hospital Door
4Pages

Catalog excerpts

MF5 - Hermetically Sealed Sliding Hospital Door - 1

Sliding Hospital Door Operating Theatres Aseptic Suites Recovery Rooms Delivery Rooms Hygienic door systems

MF5 - Hermetically Sealed Sliding Hospital Door - 2

m Hygienic door systems MF5 Designed to help control airborne infection The MF5 hermetically sealing sliding door has been specifically designed for use in Operating Theatres, Isolation wards, Mortuaries, X-ray and Recovery rooms. Sliding doors require much less valuable space than hinged doors and when operated produce far less air dsturbance as they slice through the air. When closed the unique patented track system allows the door to move down/in under its own weight and in conjunction with a continuous neoprene gasket it seals perfectly against the floor and frame. The efficiency of the...

Open the catalog to page 2

MF5 - Hermetically Sealed Sliding Hospital Door - 3

Patented Track System The unique patented track system is angled at 45 degrees and special indentations allow the bearings to roll down and in enabling the door using its own weight to seal perfectly against the frame and floor. Key Features of Hermetic Door Automation Features • Controls air leakage • Lower air handling costs • Reduces cross contamination • Smooth hygienic surface • Safe reliable, low maintenance • No floor track required • Good sound reduction creates quiet • Safe reliable operation • In built safety sensor eliminates the working environment need for a safety edge •...

Open the catalog to page 3

MF5 - Hermetically Sealed Sliding Hospital Door - 4

The surface of the door is completely flush and can be offered in the following finishes. A. 6.0mm hard plastic solid laminate B. Lead inlay for X-ray/Radiation protection C. 0.9mm hard plastic laminate on MDF Architects Specification Door: Single leaf/Bi parting sliding MF-5 with hermetic seal Track: Aluminium rail system with nylon bearings Doorblade: 48 mm PU core faced both sides with 1 mm hard plastic laminate on 5 mm board / 6 mm hard plastic laminate framed in anodised aluminium profiles Colour: From Formica colour range Frame: Aluminium profile/Stainless Steel to suit wall...

Open the catalog to page 4