CLEANISEPT®

CLEANISEPT®

CLEANISEPT®

Product catalog summary
Product Overview: CLEANISEPT is an aldehyde-free concentrate designed for disinfecting and cleaning medical inventory, devices, and various surfaces. It is alcohol-free, perfume-free, and based on quaternary ammonium compounds, offering good cleaning power and material compatibility, including suitability for acrylic glass.
Applications: CLEANISEPT is used for surface disinfection and cleaning under the Biocidal Products Regulation and the EU Medical Devices Regulation. It is suitable for non-invasive, alcohol-sensitive medical devices and non-porous surfaces.
Usage Instructions: For surface disinfection, apply CLEANISEPT solution evenly and wipe until surfaces are wet. Surfaces can be used immediately after drying. Medical devices in contact with skin should be rinsed after exposure.
Efficacy and Contact Times: CLEANISEPT is effective against bacteria, yeasts, and enveloped viruses. Recommended concentrations vary based on conditions (clean or dirty) and required contact times, ranging from 1% to 7.5%.
Material Compatibility: Not recommended for copper, brass, ABS, or polycarbonate. Conditional use is advised for linoleum, chloroprene, and EPDM.
Safety and Precautions: Causes skin irritation and serious eye damage. Toxic to aquatic life. Protective gear is required during use. In case of contact, follow specific first aid measures. Dispose of contents responsibly.
Product Availability: Available in various sizes: 1L, 2L, 5L, and 10L containers. Availability depends on national registration.
See more

Catalog excerpts

CLEANISEPT®-1

Concentrates for surface disinfection CLEANISEPT® Liquid concentrate for surface disinfection and cleaning Disinfection & good cleaning power Alcohol-free Perfume-free Product description CLEANISEPT is an aldehyde-free concentrate for disinfection and cleaning of medical inventory, medical devices and all kinds of surfaces. CLEANISEPT is based on modern quaternary ammonium compounds. It is perfume free, contains neither aldehydes nor phenols and stands out with its good cleaning power. CLEANISEPT is ideally suited for surface disinfection of non porous surfaces. It is especially recommended for all areas where, in addition to the compliance with high hygienic demands, an odour-free product is required. CLEANISEPT has good material compatibility and is also suited for acrylic glass. Spectrum of efficacy and contact times Acc. to EU Medical Devices Regulation: Disinfection and cleaning of non-invasive alcohol- sensitive medical devices. application recommendation for surface disinfection: Bactericidal, yeasticidal* with mechanical action, dirty conditions clean and dirty conditions dirty conditions Enveloped viruses active against enveloped viruses Additional test results dirty conditions clean conditions dirty conditions clean conditions dirty conditions clean conditions * including phase 2 step 1 and phase 2 EN 16615 (quantitative suspension 7.5 %and quantitative carrier tests) step 2 tests dirty conditions tests 2.5 % EN 13697 yeasticidal (C. albicans) Application Surface disinfection: Apply a sufficient amount of the freshly prepared CLEANISEPT solution evenly and wipe surfaces until they are completely wet (scrub-wipe method). For routine disinfection the surfaces can be used immediately after drying. Medical devices that come into contact with Range of application According to Biocidal Products Regulation (BPR): For surface disinfection and cleaning of medical inventory and all kinds of surfaces. dirty conditions clean conditions dirty conditions dirty conditions clean conditions clean conditions active against enveloped viruses incl. HBV/HIV/HCV dirty conditions active against enveloped viruses * including phase 2 step 1 and phase 2 step 2 tests (quantitative suspension tests and quantitative carrier tests) Dr. Schumacher GmbH Am Roggenfeld 3 · 34323 Malsfeld · Germany P +49 5664 9496-0 · www.schumacher-online.com

 Open the catalog to page 1
CLEANISEPT®-2

Concentrates for surface disinfection CLEANISEPT® Liquid concentrate for surface disinfection and cleaning Precautionary and hazard statements the skin during intended use should be rinsed for 15 s under running water of suitable quality after the exposure time has expired. Causes skin irritation. Causes serious eye damage. Very toxic to aquatic life with long lasting effects. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.