Concentrates for surface disinfection CLEANISEPT® Liquid concentrate for surface disinfection and cleaning Disinfection & good cleaning power Alcohol-free Perfume-free Product description CLEANISEPT is an aldehyde-free concentrate for disinfection and cleaning of medical inventory, medical devices and all kinds of surfaces. CLEANISEPT is based on modern quaternary ammonium compounds. It is perfume free, contains neither aldehydes nor phenols and stands out with its good cleaning power. CLEANISEPT is ideally suited for surface disinfection of non porous surfaces. It is especially recommended for all areas where, in addition to the compliance with high hygienic demands, an odour-free product is required. CLEANISEPT has good material compatibility and is also suited for acrylic glass. Range of application According to Biocidal Products Regulation (BPR): For surface disinfection and cleaning of medical inventory and all kinds of surfaces. Acc. to EU Medical Devices Regulation: Disinfection and cleaning of non-invasive alcohol- sensitive medical devices. Application Surface disinfection: Apply a sufficient amount of the freshly prepared CLEANISEPT solution evenly and wipe surfaces until they are completely wet (scrub-wipe method). For routine disinfection the surfaces can be used immediately after drying. Medical devices that come into contact with Spectrum of efficacy and contact times including phase 2 step 1 and phase 2 step 2 tests (quantitative suspension tests and quantitative carrier tests) I Dr. I Schumacher *1 Dr. Schumacher GmbH Am Roggenfeld 3 • 34323 Malsfeld • Germany P +49 5664 9496-0 • www.schumacher-online.com

CLEANISEPT®Liquid concentrate for surface disinfection and cleaning the skin during intended use should be rinsed for 15 s under running water of suitable quality after the exposure time has expired. According to the EU Medical Device Regulation, users/patients are obligated to report any serious incident that has occurred in relation to the device to the manufacturer and the competent authority of the EU Member State in which the user/patient is established. Composition 100 g contain: 3.33 g didecyldimethylam-monium chloride, 6.66 g alkyl (C12-16) di-methylbenzylammonium chloride. Material compatibility...