Catalogs >
Dräger >
How to clean the Dräger Babyleo TN500 Cleaning in 5 steps

How to clean the Dräger Babyleo TN500 Cleaning in 5 steps
2Pages

Catalog excerpts

How to clean the Dräger Babyleo TN500 Cleaning in 5 steps - 1

How to clean the Dräger Babyleo TN500 Cleaning in 5 steps Please complete all cleaning practices according to your hospitals guidelines. This document is for informational purposes only. Refer to the instructions for use of the device for full disassembly, cleaning and disinfecting instructions. Prerequisites: There is no patient in the device. Starting the automatic humidifier cleaning: • Open the hood. Please turn the page for assembling and dissambling. Machine cleaning and thermal disinfection for: • On the Main menu touch the Special procedures... • Open the Humidifier cleaning tab. • Touch the On button and confirm with rotary knob. • Wait until the humidifier cleaning is complete. This can take up to 60 minutes. Do not disassemble the device during cleaning. Surface disinfection cleaning for: • Each part removed during disassembly. • Hood and access panels from inside and outside. • X-ray flap air ducts (1): clean by pulling a piece of cloth soaked in disinfectant through each duct. • Display, main column, trolley, handles and all outer parts. • Drawer from outside and inside including insert piece. Only use disinfectants as listed in the instructions for use. Make sure no liquid penetrates into the device. Ensure all surfaces are dry before using for therapy. 90 50 645 | 16.07-1 | Marketing Communications | HQ | © 2016 Drägerwerk AG & Co. KGaA

Open the catalog to page 1

How to clean the Dräger Babyleo TN500 Cleaning in 5 steps - 2

2 Open front and side 3 Remove hose grommets 11 Close front and side 10 Insert hose grommets on 6 Remove the mattress tray. Open the hood and remove frame seals from both sides. Step 1, 3, 4 and 5, please turn the page edges of the hood and ensure the seals are correctly positioned. tress* and scale* cables and remove mattress. Or simply remove SoftBed. mattress tray. Pull heated mattress* and scale* cables through grommets and plug into sensor wall. access panels. access panels. Fit the mattress tray in place. on the sensor wall and on the front access panel (6 pieces total). the sensor...

Open the catalog to page 2