*mymedicalexpo

842VES

Product catalog summary

Overview: The Horizon Model 842VES, also known as Plasmafuge-6, is a compact centrifuge from Drucker's Performance Series. It offers extensive control over its operations, including variable acceleration and deceleration, and easy input for time and speed. The high-speed capabilities allow for the production of platelet-poor/free plasma, significantly reducing processing times. The exclusive horizontal rotor design facilitates quick sample loading and complete horizontal separation.

Specifications:

Dimensions: Height - 8.0 in (20 cm), Width - 11.0 in (28 cm), Depth - 13.5 in (34 cm)
Weight: 23 lbs (10.5 kg)
Motor: 1/2 H.P. Brushless DC
Power Requirements: 200 Watts, Voltage: 115/230 Volts, Frequency: 50/60 Hz
Timer: Electronic, 0 to 99 minutes with +/- 1% accuracy
Compliance: ETL Compliant to ANSI/UL Standards, CE Marked

Safety Features:

Automatic Lid Lock: Prevents operation with an open lid and ensures the lid cannot be opened while samples are spinning.
Positive Lid Latching: Ensures firm mechanical latching to prevent debris escape in case of breakage.
Clear Lid: Allows safe observation and access for phototachometer.

Operating Features:

Electronic Timer with Display: Selectable from 1 to 99 minutes with a hold feature.
Brushless DC Motor: Ensures smooth, quiet operation with no routine maintenance.
Quiet Operation with Low Vibration: Achieved through a double-encased motor and unique stability mount.
Variable Acceleration and Deceleration: Customizable run from start to finish.
End-of-Run Audible Indicator: Alerts when the rotor has stopped.
Variable Speed: Precision control from 500 RPM to maximum rotor speed in 50 RPM increments.
Electronic Speed Control with Display: Allows setting by RPM or RCF.
Out-of-Balance Detection: Ensures safe, controlled stop if imbalance is detected.
Welded Steel Construction: Provides strength and durability.

Rotor and Tube Specifications:

6-Place Horizontal Rotor: Supports tubes up to 17mm x 100mm, speed range 1000 to 4500 RPM, force range 140 to 2800 xg.
6-Place Performance Plus Horizontal Rotor: Supports tubes up to 13mm x 75mm, speed range 1000 to 6500 RPM, force range 140 to 5000 xg.
12-Place Fixed-Angle STAT Rotor: Supports tubes up to 15mm x 100mm, speed range 1000 to 7000 RPM, force range 140 to 5700 xg.

Contact Information: Drucker Company, 168 Bradford Drive, Port Matilda, PA 16870, USA. Phone: +1-814-692-7661, Fax: +1-814-692-7662, Website: www.druckercompany.com

Catalog excerpts

Rapid Separations Full Horizontal Separation for Six (6) Tubes up to 10ml Precise Variable Controls ETL Compliant to ANSI/UL Standards; CE Marked Horizontal Rotor (standard) General Specifications: Plasmafuge-6, Model 842VES Centrifuge Overall Height: Dimensions: Width: Depth: Min. Acceleration Time: Min. Deceleration Time: Weight: Centrifuge Motor: Protection Breaker: Timer: Max. Power Requirements: Voltage: Frequency: NOTE: Specifications subject to change 8.0 in. (20 cm) 11.0 in. (28 cm) 13.5 in. (34 cm) 15 seconds 15 seconds 23 lbs. (10.5 kg) 1/2 H.P. Brushless DC 4 Amp. Re–settable Electronic, w/hold or 0 to 99 minutes +/- 1% 200 Watts 115 / 230 (+/- 10%) Volts 50/60 Hz A horizontal rotor produces better separation with a tighter gel line, eliminating remixing and re-spins. 10mL test tubes up to 17mm x 100mm UL Std. 61010A-1 and UL Std. 61010A-2-20, CAN/CSA C22.2 No. 1010.1 and CAN/CSA C22.2 No. 1010.2.20, The Horizon Model 842VES, Plasmafuge-6, is the most compact of Drucker’s Performance Series centrifuges. The 842VES offers control over almost every aspect of the unit’s operation from variable acceleration and deceleration to easy time and speed input. High speed and force capability produces platelet-poor/free plasma and greatly reduce processing times. The exclusive Drucker horizontal rotor allows for quick and easy sample loading and complete horizontal separation. Save settings in one of 10 memory locations and recall them at the touch of a button. Form No. 391 Model 842VES Specifications Sh

Open the catalog to page 1

OPERATING FEATURES SAFETY FEATURES • ELECTRONIC TIMER w/DISPLAY: Selectable from 1 to 99 minutes, hold feature, (+/-1%) • ELECTRONIC SPEED CONTROL w/DISPLAY: Easily set the running speed by RPM or RCF • BRUSHLESS DC MOTOR: For smooth and quiet operation with no routine maintenance • VARIABLE ACCELERATION AND DECELERATION: Customize the run from start to finish • END-OF-RUN AUDIBLE INDICATOR: Sounds when the rotor has stopped to inform the operator that a cycle is completed • VARIABLE SPEED: Precision variable speed control gives the operator the ability to select from 500 RPM to the maximum rotor...

Open the catalog to page 2

All Drucker Diagnostics catalogs and technical brochures

Archived catalogs

APEX 24
4 Pages
APEX 12
4 Pages