DASH Flex 12, Apex 12
1 / 2Pages

DASH FLEX 12 & APEX 12 STAT CENTRIFUGES Always know when your STAT samples are ready: the unique flashing lid lights (patent pending) make it easy to track cycle status and keep TAT down. With your choice of digital display or repeatable two-button operation, both units can be programmed with your validated cycles and arrive preset with common STAT spin cycles for convenience. Easy to Monitor LED lid lighting indicates when the centrifuge is ready (off), running (on), or done (flashing), reducing forgotten samples and keeping your average TAT down. The DASH Flex 12’s digital display shows cycle parameters and time remaining. Easy to Use Program up to 10 custom time, RPM, and g-force settings with the DASH Flex 12. Or, set and lock your three preferred cycles using the DASH Apex 12’s two-button interface. Both arrive pre-programmed with the most common STAT settings and can spin 75-100 mm (3-10 mL) tubes with the same rotor and universal tube holders. Eliminate Wait Time DASH centrifuges are so compact that they can be used in an array in accessioning. The array will allow spinning samples as soon as they arrive, further shortening your TAT. For a more compact unit, consider the 6 tube capacity DASH Apex 6. Safe and Durable Enjoy years of worry-free operation with the DASH’s brushless motor and rugged, reinforced carbon fiber components. Enhance lab safety with imbalance protection and a clear, shatterproof lid, which locks until the centrifuge has stopped completely. A Great Value Each DASH centrifuge comes fully equipped and ready to run with a horizontal rotor, universal tube holders, and 2-year warranty included in the affordable price. Choose the DASH Flex 12 for flexibility & cycle display. Choose the DASH Apex 12 for repeatability with set and lock controls. STAT Chemistry, Coag, PPP Rotor, Buckets or Tube Holders Designed, built, and supported in the USA Rotor: lifetime warranty Extended warranty availa

DASH FLEX 12 & APEX 12 Lid lights indicate cycle status: ready, running, done LED lights clearly indicate selected cycle Program and name your custom validated cycles Store up to 10 settings View RPM and remaining spin time on the digital display Select a preset cycle, program your validated cycles, or lock to a single setting Free 30-Day Evaluation (U.S. Only) Specifications Sound level Dimensions (W x D x H) Part Numbers Replacement 75 & 100 mm black tube holder Custom Settings * * Add this part number to your centrifuge order to have your custom validated cycles pre-programmed at the...