DASH DASH FLEX 24 PROGRAMMABLE STAT CENTRIFUGE The DASH Flex 24 is the solution for high-volume STAT needs. Customize settings and check every detail on the digital display, and save up to 10 custom cycles to produce high-quality STAT samples. Always know when your STAT samples are ready: unique flashing lid lights (patent pending) clearly show cycle status and keep TAT down. Easy to Monitor LED lid lighting indicates when the centrifuge is ready (off), running (on), or done (flashing), reducing forgotten samples and keeping your average TAT down. The digital display shows cycle parameters and time remaining. Easy to Use Set and save up to 10 programmable time, speed, and g-force settings using the user-friendly interface. The DASH Flex 24 arrives pre-programmed with the most common STAT settings and can spin 75-100 mm (up to 50 mL) tubes with the same rotor and universal tube holders. Eliminate Wait Time 2-Stage Horizontal Rotor The DASH Flex 24’s patented swing-out horizontal rotor design incorporates a unique test tube holder that produces the ideal horizontally separated samples. Loading Angle Rotation Angle The DASH Flex 24 is so compact that it can be used in an array in accessioning. The array will allow spinning samples as soon as they arrive, further shortening your TAT. For a more compact unit, consider the 6-tube DASH Apex 6. Safe and Durable Enjoy years of worry-free operation with the DASH’s brushless motor and rugged, reinforced carbon fiber components. Enhance lab safety with imbalance protection and a clear, shatterproof lid, which locks until the centrifuge has stopped completely. A Great Value Each centrifuge comes fully equipped and ready to run with a horizontal rotor, universal tube holders, and 2-year warranty included in the affordable price. STAT Chemistry, Coag, PPP Rotor, Buckets, and Tube Holders Designed, built, and supported in the USA Rotor: lifetime warranty Extended warranty availabl

View RPM and remaining spin time on the digital display Lid lights indicate cycle status: ready, running, doneProgram and name your custom validated cycles Store up to 10 settings Free 30-Day Evaluation (U.S. Only) ^j^Drucker Diagnostics druckerdiagnostics.com [email protected] Part Numbers * Add this part number to your centrifuge order to have your custom validated cycles pre-programmed at the factory Protected by U.S. Patents #6.811.531. #D718,463S #D734,489S Other Patents Pending.