Buxco® Inhalation Tower Controller

Product catalog summary

Device Overview and Interface Components
This document outlines the key components and interface ports of a plethysmograph system designed for respiratory and airflow measurements. The system includes multiple input and output ports, control lines, and sensor connections to facilitate comprehensive data acquisition and control.

Main Sections and Components:

Inflow and Outflow Dryers: Devices to condition airflow by removing moisture, ensuring accurate measurement conditions.
Plethysmograph Calibration Port: A dedicated port for calibration of the plethysmograph to maintain measurement accuracy.
Display and Keypad: User interface for system control and data visualization.
Photometer Inputs: Inputs for photometric sensors, likely used for gas concentration measurements.
Flow Transducer Inputs: Multiple inputs (4x and 8x) for flow transducers to measure airflow rates at various points.
Tower Outflow Filter: A filter component to ensure clean airflow exiting the tower.
Pressure Transducer Input: Input for pressure sensors to monitor system pressure.
Nebulizer Input and Auxiliary Nebulizer Control Lines: Ports and control lines to integrate and manage nebulizer devices within the system.
Tower Pressure Balance Port and Tower Inflow/Outflow Ports: Ports to manage and balance pressure within the plethysmograph tower and control airflow.
Auxiliary Control Lines and Supplemental Airflow Control Lines: Additional control lines for managing auxiliary devices and supplemental airflow units.
O2/CO2 Sampling Ports and Gas Analyzer Port: Connections for sampling oxygen and carbon dioxide gases and interfacing with gas analyzers.
Temperature & Humidity Probe Input: Input for environmental sensors to monitor temperature and humidity, critical for accurate respiratory measurements.
Air Flow Source Port / Push or Pull: Port to connect the primary airflow source, with push or pull configuration options.
Smart Tower Controller and Tower Auxiliary Controller: Control units managing the tower functions and auxiliary devices.

Critical Information and Best Practices:

Ensure proper calibration via the plethysmograph calibration port to maintain data accuracy.
Use inflow and outflow dryers to prevent moisture interference in airflow measurements.
Connect flow transducers and pressure transducers correctly to capture precise respiratory parameters.
Utilize auxiliary and supplemental airflow control lines to fine-tune airflow conditions as required.
Monitor environmental conditions through temperature and humidity probes to adjust for measurement variability.
Maintain clean airflow with tower outflow filters to avoid contamination.
Integrate gas analyzers via dedicated ports for comprehensive respiratory gas analysis.

Catalog excerpts

Better Data. Better Science. Photometer Inputs Inflow and Outflow Dryers 4x Flow Transducer Inputs Plethysmograph Calibration Port Tower Outflow Filter Pressure Transducer Input Nebulizer Input Tower Pressure Balance Port Smart Tower Controller Supplemental Airflow Control Lines Tower Inflow and Outflow ports Temperature & Humidity Probe Input Auxiliary Control Lines Auxiliary Nebulizer Control Lines 8x Flow Transducer Inputs Tower Auxiliary Controller O2/C02 Sampling Ports Connections O2/CO2 Gas Analyzer Port Air Flow Source Port / Push or Pull 4x - Supplemental Air Flow Units 119 14th Street NW, Suite 100, St. Paul, MN 55112 · tel +1 (651) 481-7400 / +1 (800) 262-9687 · fax +1 (651) 481-7404 www.datasci.com Copyright 2016 Data Sciences International ©

Open the catalog to page 1

All DSI catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list