The D015M is a multi-purpose MVB interface on a 40 x 85 mm size footprint (PC/30). All features of the MVB architecture are available: Process Data, Message Data, Bus Administrator as an option and physical layer EMD or ESD+. - MDFULL: passive MVB interface with a duagon MVB controller - SERVER: active MVB interface including the Message Data Real Time Protocol stack MD RTP. This approach minimizes the CPU requirements of the host system, because the major part of the communication software is running on the duagon interface A handy starter-kit is available for evaluation and host-application-software development. The D015M complies with the TCN standard IEC 61375. It is designed for the harsh traction environment and conforms to the EN 50121, EN 50155 and EN 61373 standards, e.g. by: - Coating against humidity - Enhanced EMI and vibration robustness Besides the D015M, the D015 series covers interface boards for the following vehicle bus systems: - D015M: MVB Interface (this document) All interface products of the D015 family have the same PC/30 footprint. That way, modules of this product family can easily be exchanged without adaptation of the customer's host PCB. - Optionally, the D015M can act as a full featured MVB Bus administrator - ANSI C source files allows an easy porting to any host / operating system combination - The module is compatible with EMD and ESD+ physical MVB layers - The D015M conforms with the EN50121, EN50155, EN 61373 and IEC61375 standards, and is designed for the harsh traction environment - Modules of this product series (D015) can easily be exchanged without adaptation of the customer's host PCB - Generic MVB interface featuring a passive or active MVB - Integration of several D015 interfaces on a host system, for interface and different physical MVB layers example to connect a host system to Ethernet, MVB or CAN D205 / D206 Evaluation Kit This evaluation kit allows the development of the host software A reference schematic and software examples help to speed up using either the serial (D205) or the parallel (D206) interface. the integration time. The delivered adapter card enables the mounting of any D015.

CPU base - 32-bit soft-CPU Diagnostic/ - Device status information/identification available System - up to 32 Mbyte Flash Memory Service through host interface - up to 100 kByte SDRAM Memory - JTAG and serial line available MVB - Supports two redundant MVB lines A and B lnterface - MVB lines A and B are galvanically insulated from the logic/IO and from each other - MVB physical layers ESD+ or EMD - Provides double and single 9-pin SUB-D connectors, other available on request - MVB lines A and B are galvanically insulated from the logic/IO and from each other MVB - Available in MDFULL or SERVER...