GEL FOR ENAMEL ETCHING & DENTIN CONDITIONING THE FUTURE OF DENTISTRY Product Description : Microgel SF is a green tinted viscous gel of 37% phosphoric acid semi gel silica free composition recommended for use on enamel and dentine. Its non drying thixotropic liquid composition prevents thickening and dry out with time and thus maintain its flow characteristics. Applications : Used for conditioning both dental enamel and dentine surfaces prior to the placement of an adhesive restoration. Composition : Phosphoric Acid, F & D Green Dye, Purified Water and Thickening agent. Method of Use : Clean the area to be etched, rinse and dry thoroughly. Place the tip against the surface to be etched and slowly dispense the gel on the surface to lay a fine line or paint a thin layer to the areas to be etched. Allow the gel to stay for 10-15 seconds and rinse thoroughly with water spray. Dry etched tooth surface with clean, dry air. Precautions : The product contains phosphoric acid. It can burn and cause irritation to the tissues and therefore confine the use to areas to be etched. Fix the applicator tip to the syringe and check the flow of gel before applying on the etching surface. Avoid contact with eyes and prolonged contact with skin. Warning : Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe of f thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components. Storage : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place. Shelf Life : 3years from the date of manufacturing. Presentation : Ref. 10010 Intro Pack : 1 x 5ml Syringe, 10 x Applicator Tips. Ref. 10011 Economy Pack : 4 x 5ml Syringe, 40 x Applicator Tips. Disposal conditions : To be disposed off based on the prevailing rules of the country in Prevest DenPro Limited Unit ll, EPIP, Bari Brahmana, Jammu-181133, India. www.prevestdenpro.com Customer Care No. : 1800-180-7172 Email : [email protected] I LOT Symbol for "BATCH CODE” ^ Symbol for "USE BY” /SsK Symbol for "NON STERILE” ^ Symbol for "KEEP DRY” ^Symbol for "CAUTION” [J] Symbol for "CONSULT INSTRUCTION FOR USE” |REF| Symbol for "CATALOGUE NUMBER” HCTrIP SYMBOL FOR EUROPEAN COMMUNITY AUTHORIZED REPRESENTATIVE Symbol for "DO NOT USE IF PACKAGE IS DAMAGE” Symbol for "KEEP OUT OF THE REACH OF CHILDREN” Symbol for "MANUFACTURER NAME & ADDRESS” ""Symbol for "TEMPERATURE LIMITATION” Symbol for "KEEP AWAY FROM SUNLIGHT” The material has been developed solely for professional dental use. Application should be carried out strictly according to the instruction for use. Liability cannot be accepted for damages resulting from failure to observe the instructions of the stipulated area of applications. The user is responsible for testing the material for its suitability and use for any purpose not explicitly stated in this instruction sheet. Description and data constitute no warranty of attributes and are not bind