*mymedicalexpo

DYNAMIC MILLING TOOL

Product catalog summary

Overview: The document provides technical specifications and usage instructions for the Dynamic Milling Tool, a precision milling tool used in dental applications, specifically for crowns with angled channels.

Specifications: The Dynamic Milling Tool is designed to mill the screw seating and increase the internal diameter of the straight channel in dental implants. It features three cutting wing-tips, each with distinct cutting areas for precise milling.

Dimensional Characteristics: The document lists various tool specifications, including connection reference, cutting diameter, seat useful length, support diameter, and total length. These specifications vary depending on the implant system, such as Straumann, Nobel Biocare, Osstem, Biomet 3i, and Zimmer.

Testing and Validation: The tool has been tested and validated for compatibility with different screw seatings, metrics, and lengths. A potential life test was conducted using a Willemin Macodel 408MT with oil cooling on G5 Titanium (Ti6Al4V). The tool maintained its functionality over 500 cycles, with minimal wear observed.

Performance Data: The potential life test results show the tool's durability, with measurements taken at various cycle intervals (123, 327, and 500 cycles) indicating slight changes in diameter, demonstrating the tool's longevity and reliability.

Conclusion: The Dynamic Milling Tool is a robust and precise instrument suitable for various dental implant systems, offering reliable performance and compatibility as detailed in the CadCam Intraoral Solutions catalogue.

Catalog excerpts

DYNAMIC ABUTMENT® SOLUTIONS STEP 2: Crown with Angled channel. STEP 3: Crown with Dynamic Milling Tool. Milling the screw seat and increasing the diameter of the straight channel. DYNAMIC ABUTMENT® SOLUTIONS DYNAMIC MILLING TOOL DMTONE DYNAMIC MILLING TOOL

Open the catalog to page 1

Dynamic Milling Tool Dimensional Characteristics Each tool is compatible depending on screw seating, metric and length Precision milling tool. In the screwed angled structure direct to implant, it is used to mill the screw seating and to increase the internal diameter of the straight channel. There are 3 cutting wing-tips with 3 different cutting area each, to mill the screw seating and to increase the internal diameter of the straight channel. DMTONEDYNAMIC MILLING TOOL CONNECTION *Full compatibility chart in the CadCam Intraoral Solutions catalogue POTENTIAL LIFE TEST OF THE DYNAMIC MILLING...

Open the catalog to page 2

All Dynamic Abutment Solutions catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list