easy implant cylindrical-conical implant Indications : To treat low bone density in maxillary cases. To stabilize a xed or removable prosthesis of a unitary, interleaved, terminal or total reconstruction. The volume and bone quality should be sufcient to support the implants. Internal connection : • Internal hexagon and morse taper connection. • Switching platform : Bone mass preservation. Conservation of papillae’s geometry and volume. Implant delivered with : Full pack • Cover screw • Healing screw • • • • Implant analog Straight titanium abutment Denitive screw Impression coping screw / lab screw Standard pack «No touch» system : Contraindicated with high bone density (D1). • Breakable implant and cover screw All the elements can be extracted using the usual drivers (manual or on contra angle). Lilas range Healing abutments Manual TMP25-C Short TMP25-L Long Contra angle MPi25-C Short MPi25-L Long

drilling protocol The pointed end of the drill has a length of 1.00 mm. This value must be considered when drilling. Values D2 to D4 determine the densities for which the drill should be used. Do not set a rotation speed (in revolutions per minute) beyond the recommendations listed. 638^^1 ITlplant 74650 CHAVANOD (France) MASTER-L FRANCE