Eco-Spectrum Catalog
36Pages

2021 PRODUCT CATALOG END-TO-END INNOVATIVE PROCESS EQUIPMENT DEVELOPER AND MANIFACTURER Federal level of State Environmental Expert Review European Conformity Enterprise attestation

DEVLETOVA OKTYABRINA SHAKIROVNA Company’s Founder, 2011. Holder of titles 2020 Industry Professional of Russia, 2020 Leader of Industry of Russia. • Eco-Spectrum is committed to the development of ecological equipment in which you can be absolutely confident: • Availability of State ecological expertise with a list of wastes containing over four thousand subjects from Federal classificatory catalogue of wastes confirms our equipment compatibility with all ecological requirements and standards in environment protection legislation. • Upon design, comprehensive approach is used with methods...

ECO-SPECTRUM CLIENTS Leading-edge solutions for wastes utilization About Eco-Spectrum

ENGINEERING AND TECHNICAL RESOURCES OF ECO-SPECTRUM Own production capacities and professional competence of the stuff enables the company to hold leading positions in the sphere of equipment manufacturing for decontamination and utilization of wastes. Our company continuously improves itself and implements unique innovative technologies in the production and equipment development as well. Each piece of equipment is developed exclusively for the specifics of the customer’s waste, in collaboration with environmental engineers, chemists of the company with the involvement of independent...

QUALITY CONTROL DEPARTMENT Company’s Quality Control Department (QCD) conducts quality control at each stage of production. Selection of raw material by qualitative indices is carried out upon searching and acceptance of materials and accessories with internal control by technical means of the enterprise, as well as involving independent laboratories in order to meet all the requirements before shipping end product. In-house material and technical basis of the enterprise permits to produce qualitative and highly competitive product. Concrete, use in equipment production, undergoes a number...

In order to obtain accurate data of measuring instruments upon equipment operating, all the accessories undergo quality control. Important stage of automation of quality control system instruments are their examination and testing on conforming correspondence with specified technical regulations. Technical properties of insulating materials provide primary influence on quality of mounted insulation. Cutting out, assembly and mounting are performed using production resources of the enterprise and all accessories are manufactured as per proprietary drawings and process charts. QCD...

WITH CONSIDERATION OF LABORATORY TESTS RESULTS At the stage of technical solution preparation and design of thermal destruction and utilization installations of VOLKAN and HURIKAN series, tests on customer wastes are performed, as appropriate, in order to obtain required data with the purpose to determine accessories and reasonability to apply gas-cleaning equipment. Measurements are performed by independent laboratory with further calculations, performed by stuff specialists of the company from engineer-ecological department, for justification of technology selection and possibilities of...

Customer’s wastes are tested at test facility VOLKAN and HURIKAN for obtaining biotesting results and chemical components with the purpose to determine ability of subsequent application as secondary material resources. Ash, obtained during wastes utilization, due to the process equipment involved, has uniform dispersion and considerably reduced hazard category, that corresponds to all the requirements for its further application as secondary material resources for substitution inert materials in construction. End use of secondary material resources are the following: production of foam an...

END-TO-END PRODUCTION STAGE 1 Revealing customer requirements and preparation request for proposal Complex solution for the development of common concept of the project and technical fit-out of the areas with consideration of customer specifications. STAGE 2 Design of equipment with consideration of process area specifications Professional engineering work is performed by designengineers of 1-2 category in the systems of computer assisted design. Production is equipped by the modern machine tools with CNC, which ensures high quality and accuracy of details production. Assembly of equipment...

GÖKHAN AYDOĞAN Chief engineer of Eco-Spectrum, project technical manager, 20 years’ experience Education: Higher education, faculty of mechanical engineering, Gazi Üniversitesi, Ankara, Turkey Design, construction and mechanical equipment operation, machines, apparatuses in different spheres of production and national economy. Customer feedback: Express our gratitude to chief engineer of Eco-Spectrum for individual approach in solving complex technical tasks and their implementation. We are convinced in competence and professionalism of the company’s stuff, in high level of organization and...

DEVELOPMENT OF UTILIZATION AREAS Eco-Spectrum on a number of occasions performs process arrangement and process areas modeling, where equipment is selected by technical characteristics, corresponding to the required wastes treatment capacities on the basis of target requirements and purposes of treatment. Vast experience of equipment implementation for wastes utilization into production and process cycle enables Eco-Spectrum to optimize cycle steps with consideration of different equipment selection in correspondence with the site specifications. Therewith emphasis is place on receive a...

OPTIONS OF SITES TECHNICAL FIT-OUT Process system for “tails” utilization after assortment of solid municipal waste on the basis of thermal decontamination by rotary installation and wastes utilization HURIKAN 5000R with recuperator’s efficiency of 75%, with thermal capacity of 6 МW, with production capacity of 40 000 tons of wastes per year with reduction of “tails” assortment to 98% and heat withdrawal at production needs of the complex and concrete goods block, where ash residue, obtained after thermal treatment, is used instead of sand . Turnkey projects Process system for “tails”...