FS5 Brochure
1 /9Pages

FS5 Brochure

FS5 Brochure
1 /9Pages

Catalog excerpts

FS5 Brochure-2

Excitation Monochromator Emission Monochromator Light Sources Transmission Detector Reference Detector Emission Detectors Sample Module OVERVIEW AND SOFTWARE Single photon counting sensitivity, optical design, reliability and unrivalled Fluoracle® software. MEASUREMENT EXAMPLES Various types of measurements, scans and sample types. The FS5 is a fully integrated, purpose-built spectrofluorometer. Suited for analytical and research laboratories, the FS5 can handle the speed of routine analysis and the sensitivity of demanding research requirements. Absorption Spectra > Steady State Fluorescence...

 Open the catalog to page 2
FS5 Brochure-3

INSTRUMENT SENSITIVITY FLUORACLE® SOFTWARE To achieve optimal sensitivity, resolution, and acquisition speed, we engineer the FS5 with an air-sealed excitation path to enhance the excitation power in the UV, select only the optimal performance photomultipliers in temperature stabilised housings, utilise an optical design that includes plane, spherical, toroidal, ellipsoidal mirrors and optimised mirror coatings. The FS5 is truly unrivalled in its spectral performance and sensitivity. The operating software for the FS5 Spectrofluorometer is named Fluoracle. This is an exceptional software package...

 Open the catalog to page 3
FS5 Brochure-4

EXCITATION AND EMISSION SCANS ABSORPTION / TRANSMISSION SCANS In spectral scans, fluorescence intensity is recorded as a function of excitation or emission wavelength. The data is automatically corrected for the spectral response of the instrument and variations in excitation power thanks to its accurate, factory generated correction files and silicon reference detector. The FS5 is equipped with a transmission detector as standard which enables the absorption and fluorescence spectra of a sample to be measured using a single instrument. The transmission detector can also be used to monitor the...

 Open the catalog to page 4
FS5 Brochure-5

EXCITATION-EMISSION MAPS TEMPERATURE CONTROL Excitation-Emission Maps (EEMs) provide a ‘fingerprint’ of complex mixtures of substances. These maps can be measured either by a series of emission scans with a stepwise increase or decrease of the excitation wavelength or by a series of synchronous scans and stepwise increase of the excitation-emission offset. There are a range of temperature control modules for the FS5, enabling the change in fluorescence and absorption of samples to be measured over a temperature range of 77 K to 500 K. An overview of some of the most popular modules for temperature...

 Open the catalog to page 5
FS5 Brochure-6

The FS5 upgrade options are modifications or additions to the main body of the FS5. All upgrades are best installed at the time of manufacture, but they can also be retro-fitted by a qualified service engineer during an on-site visit. All the standard features of the FS5 are retained when an upgrade option has been added and many upgrade options can be combined. This offers outstanding flexibility for an instrument of this class. WAVELENGTH EXTENSION UPGRADES UV Wavelength Extension Enhance and extend the range of UV excitation with an ozone-generating bulb and an excitation grating optimised...

 Open the catalog to page 6
FS5 Brochure-7

SAMPLE MODULE RANGE SAMPLE HOLDERS Sample holders are available for all solids, liquids, powders and thin-films. All sample types can be temperature controlled through a variety of in-house and third party holders and accessories. Sample modules containing a variety of sample holders are available for practically all applications. Top Loading Access These accessories can be purchased at any time and can easily be installed by the user. The installation takes no more than a few seconds for most of the modules. The Fluoracle software automatically recognises which of the sample measurement modules...

 Open the catalog to page 7
FS5 Brochure-8

SCA-1 Solid Sample Holder STANDARD CONFIGURATION SAMPLE MODULES AND ACCESSORIES The SCA-1 replaces the standard cuvette holder of the SC-05 sample module. It is designed for photoluminescence and transmission measurements of solid samples and is an economical alternative to the SC-10 module. All-reflective for wavelength independent focus with high brightness (small focus) at the sample Detection Technique Single Photon Counting Light Source 150 W CW Ozone-free Xenon arc lamp Czerny-Turner design with dual grating turret; plane gratings for accurate focus at all wavelengths and minimum stray...

 Open the catalog to page 8
FS5 Brochure-9

EDINBURGH INSTRUMENTS 2 Bain Square, Kirkton Campus, Livingston, EH54 7DQ United Kingdom Tel: +44 (0)1506 425 300 Fax: +44 (0)1506 425 320 [email protected] Customer support is available worldwide edinst.com Registered in England and Wales No: 962331 VAT No:GB 271 7379 37 ©Edinburgh Instruments Ltd 2022 Stage 11 / 09.2023 MANUFACTURED WITH PRIDE IN THE UNITED KINGDOM

 Open the catalog to page 9

All Edinburgh Instruments catalogs and technical brochures

  1. EPLED SERIES

    2  Pages

  2. VPLED SERIES

    2  Pages

  3. VPL SERIES

    2  Pages

  4. HPL

    2  Pages

  5. EPL SERIES

    2  Pages

  6. IR5

    8  Pages

  7. DS5

    4  Pages

  8. RMS1000

    16  Pages

  9. RM5

    12  Pages

  10. LP980 Brochure

    20  Pages

  11. MTL 5 Series

    2  Pages

  12. PL Series

    4  Pages

  13. Mini T

    2  Pages

  14. Life Spec II

    4  Pages

Archived catalogs

  1. FS5

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.