ATLANTIS: multifunctional machine. Divests all types of cylinders using a precision cutting waterjet Respects your health: Atlantis eliminates dust. The divesting action is done through a water jet: the particles of the abrasive and the investment material are both captured by water. Rapid - High-powered - Gentle processing: Extremely reduced time of the divesting process: Using cylinders for ceramics, the necessary time is 1/3 of the time required by a traditional sandblaster. Cost-effective: Costs reduction for consumables. Just compare the costs of: 10 kg of abrasive vs 10 litres of water…….save your money! Required connections:  to the water supply network; minimum pressure: 0.1 MPa (a water softener is not required)  to the pneumatic supply network: max. 0.6 MPa  to the mains: 220 Vac - 50 Hz - 16 A  water drain to sedimentation tank www.effegibrega.it 200550-00 -EN - Manufacturer reserves the right to make changes and improvements without notice.

ATLANTIS: multifunctional machine. The idea:  Atlantis was invented in order to divest phosphate coating from cylinders in refractory material in a modern dental technician laboratory. It is faster and improves the divesting technique on any type of material. It is excellent in order to divest ceramic, disilicate, noble metals and predominantly base alloys cylinders. The impact of the aluminium oxide generates heat, microscopic tensions and latent microcracks. These issues are solved with this technique. Through the use of water no heat is created and the composition of the surface is kept stable...