Power Supplies Catalog
32Pages

POWER SUPPLIES

BRIEFLY ABOUT EFORE Efore Group is an international company which designs and manufactures custom and standard DC power systems and AC/DC power supplies for a wide range of demanding industry applications including telecom, industrial, medical, lighting, utility and military. Efore’s story began in March 1975 in Finland. Since then, Efore has grown from a six person engineering office to a truly global organization, operating on four continents with nearly 679 employees and serving customers worldwide. In 2013 Efore acquired ROAL Electronics, a recognized leader in digital power conversion...

POWER SUPPLIES SINGLE OUTPUT AC/DC POWER SUPPLIES NEW DDP200 – 200 W CONFIGURABLE MULTI-OUTPUT POWER SUPPLIES RCB600 – 600 W MEDICAL GRADE POWER SUPPLIES MFA160 – 160 W

SINGLE OUTPUT AC/DC POWER SUPPLIES DDP200 SERIES OPEN FRAME ENCASED (OPTIONAL) 200 W ULTRA COMPACT IEC CLASS I & II The DDP200 is a series of IT/Industrial grade power supplies designed to offer the high power density and high efficiency that space constrained and power demanding systems need. Available in 12, 24 and 48 Vdc outputs, this series of high performance AC/DC power supplies provides up to 200 W of steady output power with moving air, or 160 W with convection cooling over the full 90 - 264 Vac wide input voltage range, all in a compact 2.00” x 4.00” x 1.44” open frame form...

12V AUXILIARY Capable of 0.5 A output current. Refer to the product datasheet for details. SINGLE OUTPUT AC/DC POWER SUPPLIES OPEN FRAME 2” x 4” x 1” (51 x 102 x 27 mm) 0.35 lbs (160 g) Offering 160 W of regulated DC power from an open frame 2x4x1” standard form factor, the SFA160 series easily fits into small equipment designs. With 91% typical efficiency, it generates less heat which eases thermal management in system designs. Available in three (3) standard output voltages of 12, 24 and 48 Vdc, with a 12V auxiliary low power output which may be used to supply power to an external...

SINGLE OUTPUT AC/DC POWER SUPPLIES DDP400 SERIES FRONT FAN PERFORATED COVER HIGHEST EFFICIENCY IN ITS CLASS With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the DDP400 series of switching power supplies are the most efficient power supplies in their class. All models are available in 12, 24, 36 and 48 Vdc, standard output variants, and the U-Chassis models include a 28 Vdc variant. The fan cooled versions include the latest in built-in fan speed control. The fan speed control monitors the operating conditions and applies the...

VERY COMPACT FORM FACTOR FANLESS The Sealed power module versions of the product family uniquely address harsh environment industrial and medical equipment applications. SINGLE OUTPUT AC/DC POWER SUPPLIES SEALED (NO HEAT SINK) 3.3” x 8.3” x 1.6” (83 x 212 x 42 mm) 2.87 lbs (1300 g) SEALED (WITH HEAT SINK) 3.3” x 8.3” x 2.8” (83 x 212 x 79 mm) 3.67 lbs (1665 g) The DDP400 sealed AC/DC power supplies are potted and offer IP67 ingress protection. They come in standard output voltages of 12, 24, 36 and 48 Vdc, with auxiliary 12V fan and +5V stand-by outputs. These power supplies may be mounted...

SINGLE OUTPUT AC/DC POWER SUPPLIES Approved to the 2nd edition of the UL/IEC/EN 60950-1 standards for IT/Industrial equipment. All models are RoHS-6 compliant. J^\ ROAL C DP> DIGITAL \ / POWER

FAN-LESS VERY COMPACT FORM FACTOR Ultra compact and highly efficient, the high input voltage DDP400HV series provides a steady or continuous 400 W of regulated DC power through the full input voltage range. Available in 24, 36 and 48 Vdc standard output variants, each model includes +5V stand-by and 12V auxiliary outputs. Housed in an IP67 sealed enclosure, the unit includes flying leads for both input and output, and an optional heatsink for additional heat dissipation. * All ratings in the table above refer to 480 Vac and 50 deg C ambient temperature. In any case, the chassis hot spot...

SINGLE OUTPUT AC/DC POWER SUPPLIES HIGH PEAK POWER HIGH START-UP CURRENT CAPABLE The DDP600 series provides a steady 600 W of regulated DC power through the full 85 to 305 VAC input range with a 800 W, 10 s peak capability, all in a 4.2 X 7.0 X 1.6” form factor. The DDP600 is available in a U-frame chassis, or enclosed with a built-in front mounted fan to facilitate system integration. The DDP600 features a built-in I-share circuit for parallel operation between power units to enhance total power. By converting energy at up to 94% efficiency, the DDP600 generates less heat, facilitating...

The DDP600 series complies with the 2nd edition of the IEC 60950-1 standard for IT equipment and UL 8750 for lighting applications. The series meets the EN 55032 EMC limits of Class B for conducted and radiated emissions as well as the IEC/EN 61000-3, IEC/EN 61000-4 EMC standards. SINGLE OUTPUT AC/DC POWER SUPPLIES Model number /^\ ROAL <DPI DIGITAL \ / POWER

SINGLE OUTPUT AC/DC POWER SUPPLIES SEALED/POTTED, CONVECTION/CONDUCTION COOLED 4.92” X 10.04” X 2.36” (125 X 255 X 60 mm) 6.11 lbs (2770 g) 600 W (800 W PEAK) SEALED ENCLOSURE POTTED PCB HIGH EFFICIENCY 94% IP66 / 67 / 68 UL 8750 RATED • Over temperature, OV, OC and SC protections • Stand-by +5V, 1.5 A output • Remote On/Off signal • Low earth/touch leakage currents • IT safety approval to IEC 60950-1 • LED lighting safety approval to UL 8750 • RoHS 2 compliant (Directive 2011/65/EU) • Sealed enclosure, IP66 / 67 / 68 ingress protection grade • High efficiency (94% from 50% load and...

The DDP600 SC series is approved to the 2nd edition UL/IEC/EN 60950-1 standard for IT equipment and UL 8750 standard for LED lighting applications. It also meets the EN 55011, EN 55032 EMC limits of Class B for conducted and radiated emissions, EN 61000-3 for harmonics and flicker, IEC/EN 61000-6-2 and EN 55024 for EMC immunity standards. The DDP600 SC series of sealed IT and industrial grade AC/DC power supplies provides the compact form factor and ingress protection index that the most extreme industrial and LED lighting applications demand. The series delivers a steady 600 W (800 W...