Catalog excerpts
Distal Tibial Locked Plate • Plate Features Increased rotational stability • Anatomically contoured; plate is twisted 20° and bent to fit the distal tibia. • Available for left and right tibia. • Limited-contact shaft design with 4 to 14 combination locking/compression holes. • Eight distal locking holes accept 2.7 mm Cortex, 3.5 mm Locking, 3.5 mm Cortex, or 4.0 mm Cancellous Bone Screws. • Proximal and distal holes for 1.6 mm or 2.0 mm Kirschner wires. • 316LVM stainless steel and titanium. • Locking holes in distal region are parallel to the joint. • Elongated hole in shaft aids in initial plate positioning. • The shaft holes accept 3.5 mm Locking Screws in the threaded portion and 3.5 mm Cortex Screws, 4.0 mm Cortex Screws and 4.0 mm Cancellous Bone Screws in the compression portion. • Distal tab for optional medial malleolus screw accepts 3.5 mm Locking, 2.7 mm Cortex, 3.5 mm Cortex, 4.0 mm Cortex or 4.0 mm Cancellous Bone Screws.
Open the catalog to page 1Screws, Locking Distal Tibial Locking Plates Holes EGI-LOC™ Locked Plate Types • EGI-LOC™ Periarticular Locked Plating System from EgiFix medical offers the advantages of locked plating with the flexibility and benefits of traditional plating in one system. Utilizing both locking and non-locking screws, EGI-LOC™ offers a construct that resists • angular (e.g. varus/valgus) collapse while simultaneously acting as an effective aid to fracture reduction. • Extra-articular and simple intra-articular distal tibial fractures • Distal tibial fractures, per cutaneous or reducible by limited...
Open the catalog to page 2All EgiFix catalogs and technical brochures
-
Tumor arthroplasty
9 Pages
-
Hip arthroplasty
18 Pages
-
spine plates
16 Pages
-
spine cages
20 Pages
-
spine screws
32 Pages
-
Vertebroplasty
2 Pages
-
GAMA
2 Pages
-
PROXIMAL femur locked plate
2 Pages
-
Knee arthroplasty
6 Pages
-
Femur
4 Pages
-
TIBIA
2 Pages
-
Humerus
2 Pages
-
DHS LOCKED
2 Pages
-
Small Fragment
2 Pages
-
distal femur
2 Pages
-
large fragment
2 Pages