Catalogs >
Electrothermal >
Electromantle

Electromantle
8Pages

Catalog excerpts

Electromantle Metal Heating Mantles The original Electrothermal “Electromantles” revolutionised round bottom flask heating by incorporating a coiled flexible heating element, which ingeniously wraps the heater around the flask to optimise heat transfer. For maximum safety, the flask is held away from direct contact with the heating element via a grounded earth screen. This design principle has stood the test of time and has been imitated the world over. With many years of experience, Electrothermal remains at the forefront of laboratory heating and its associated controlling technology. We have a wide range of metal-cased Electromantles to service your laboratory’s needs and all of our Electromantle CMU series feature: • • • An easy to clean, stove-painted aluminium outer casing “Cool-to-the-touch” design through a unique patented air flow through the heater’s base housing Added safety features such as a grounded earth screen and double fuses

Open the catalog to page 1

CMU Electromantles For heating of round bottom flasks Electrothermal’s metal-cased CMU Electromantles are the culmination of years of experience and continuous design improvement. These well-established products are used throughout many industries for a huge variety of applications. Today, we can confidently guarantee to give you quality products whose reliability and safety continue to make them market leaders. Key features are: • Round bottom flask capacity of between 50ml- 5000ml • “Cool-to-the-touch” design • Element temperature up to 450 °C • Built-in energy regulator • Indicator lamps...

Open the catalog to page 2

CMUT Electromantles For heating of flasks The CMUT Electromantle is an adjustable volume CMU Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Electromantle. Key features are: • Round bottom flask capacity of between 250ml- 1000ml • “Cool-to-the-touch” design • Element temperature up to 450 °C • Built-in energy regulator • Indicator lamps for power and heater operation • Replaceable insulated heater cartridge • An easy to clean, stove-painted aluminium outer casing • Non-skid feet and support...

Open the catalog to page 3

CMUA Electromantles For heating and stirring of flasks The CMUA Stirring Electromantle shares all the excellent features of the CMU Electromantle but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution volumes and viscosities using a magnetic stir bar. Key features are: • Round bottom flask capacity of between 50ml to 5000ml • Stirring speed up to 2000rpm • Auto-recapture of magnetic stir bar; simple switch to re-activate stirring...

Open the catalog to page 4

CMUV Electromantles For heating of large flasks and funnels The CMUV Electromantles deliver the benefits of the CMU Electromantle, but do so for very large 60° funnels, as well as pear-shaped and round bottom flasks. This is achieved through a "V-shaped" design for the heating mantle, with funnels being accommodated through a bottom opening in the Electromantle base. • Accommodates pear-shaped and round bottom flasks • Large flask/funnel capacities of between 10 to 22 • Spill-proof protection against electric shocks via a stainless steel mesh screen between the flask and • Available with...

Open the catalog to page 5

Digi-Mantles Digi-Mantles enable a flask of 250ml, 500ml or 1000ml capacity to be stirred, heated up to 220 °C (or 300°C upon request) and cooled to -30 °C through precise electronic control. Key features are: • Round bottom flask capacity of between 250ml- 1000ml • “Cool-to-the-touch” design • Replaceable insulated heater cartridge maintains an even temperature distribution (±0.3°C) • Cooling plug enables -30 °C to be reached • Greater stirring stability and speeds from 250 to 800 rpm • Controller with display menus and touch pad interface • Indicator lights for power, stirrer and heater...

Open the catalog to page 6

Technical Information Controlled Model Uncontrolled Model Stirring and Heating Capacity Electrical Requirment_ CMUV Electromantles Controlled Model Uncontrolled Model Electrical Requirement_ CMUT Electromantles Electrical Reguirement Controlled Model_ Electrical Requirement_ For more information, please visit: http://www.electrothermal.com

Open the catalog to page 7

Also available in the Electrothermal range EM Electromantles EM Electromantle heating mantles are used in wet chemistry to heat liquids in round bottom flasks. The plastic case is designed to remain “cool-to-the-touch” when in operation. Electrothermal heating mantles have a grounded stainless steel earth screen covering the element and are double fused for added safety. EMA Electromantle Heating and Stirring Mantles EMA models have all the features of the EM range of heating mantles with the addition of variable speed stirring in single direction or auto reverse modes. EMV and EMX...

Open the catalog to page 8