Catalog excerpts
liquid temperature calibration baths Heat Transfer Fluid - Low Temperature The low temperature heat transfer fluid is engineered to offer non-toxic and low odour qualities at an affordable price. This fluid will satisfy the expectations of the most demanding modern day customer by providing an environmentally sound, thermally effective heat transfer fluid with a flash point of greater than 61°C (141°F) or greater. The fluid offers a low viscosity rating and unequalled heat transfer characteristics through its entire operating temperature range. Recommended temperature range -40ºC to 125ºC. When operator safety, environmental impact and price set the benchmark for your next open bath or closed loop heat transfer application, consider FHTFLO. A fume hood is recommended for open baths being operated at temperatures above +50ºC Benefits and features Low viscosity Improves bath uniformity and stability Enhanced heat-up and cool down rates Lower cost than glycol and silicone oil type fluids Safe and non-toxic Convenient 18 Litre (5 US gallon) containers NOTE: This fluid should only be used with the following plastics; Acetal, Aramid Fiber, Chemraz (FFKM), Epoxy, Fluorocarbon (Film), Flouroelastimer, Glass Fibre, Gylon style 3500,3504 & 3510, Kalrez, Kel-F (CTFE), PEEK, Polytetrafluor-ethylene, Teflon (All), Teflon Encapsulated Silicone, Teflon Encapsulated Viton, Teflon Impregnated Fibreglass, Viton, Resin Impregnated Carbon Graphite. Metal Compatibility; Aluminium, Brass, Bronze, Carbon Steel, Cast Steel, Copper, Copper Nickel, Hasteloy, Inconel, Monel, Nickel, Stainless Steel, Tantalum, Titanium. For all other material types contact Techne for specific recommendations. Technical Information Typical Properties – Low Temperature bath fluid Catalog # FHTFLO Appearance Boiling point Composition Fire point Flash point (Closed cup) Flash point (Open cup) Auto ignition temperature Critical temperature (estimated) Critical pressure (estimated) Average molecular weight Dielectric constant Thermal conductivity at 0ºC/68ºF Recommended temp. range open system Recommended temp. range closed system 1 Techne high temperature bath fluid or its vapor, like many other heat transfer fluids, may ignite if released into the environment and exposed to hot surfaces, sparks, open flames, or other source of ignition. Ordering Information FHTFLO
Open the catalog to page 1All Electrothermal catalogs and technical brochures
-
Circulating Baths
12 Pages
-
Waterproof pHTestrs®
8 Pages
-
Microfluidics
4 Pages
-
Bunsen Burners
1 Pages
-
Cole-Parmer® Water Quality
68 Pages
-
Cole-Parmer® Industrial Solutions
308 Pages
-
Cole-Parmer® Preferred Solutions®
100 Pages
-
Masterflex® & Ismatec®
48 Pages
-
Cole-Parmer® New and Best
260 Pages
-
Fluid Handling Sourcebook
116 Pages
-
Lab Essentials
100 Pages
-
BioPharma Processing
131 Pages
-
Fluid Handling Solutions
48 Pages
-
Integrity 10 Reaction Station
12 Pages
-
Melting Point Range
2 Pages
-
Slide Preparation Brochure
4 Pages
-
Reaction Stations Brochure
8 Pages
-
Focus on Heating Mantles
8 Pages
-
Heating Mantles Brochure
8 Pages
-
Digi-Mantles
3 Pages
-
Controllers
6 Pages
-
Multi (Extraction) Mantles
5 Pages
Archived catalogs
-
2nd edition Electrothermal catalogue
100 Pages
-
TechneWorks
1 Pages
-
Tecal 425F
1 Pages
-
Tecal 425S/H
1 Pages
-
Tecal 650F
1 Pages
-
Tecal 650S/H
1 Pages
-
F0885 Alundum
1 Pages
-
Cleaning parts in the IFB bath
16 Pages
-
STEM Omni and RS Series
12 Pages
-
ElectroVMV_APR13
1 Pages
-
STEM RS Reaction Stations
11 Pages
-
STEM Integrity 10
1 Pages
-
STEM Omni Reaction
6 Pages
-
Stirrers
7 Pages
-
EM, EMA, EMV and EMX Series
6 Pages
-
MU Heating Mantles
8 Pages
-
Electromantle
8 Pages