Flexor EL80
2Pages

Specifications THROUGHPUT • Up to 75 tests per hour. LIGHT SOURCE • Quartz-iodine lamp 12V-20W. REAGENT AND SAMPLE SYSTEM • One rotor combining both sample and reagent positions; • Positions for 10 ml, 25 ml and 50 ml reagent bottles; • Inner rotor ring: - 15 positions for reagent bottles; - Optionally cooled to approximately 10°C; • Outer rotor ring: - 25 positions for (STAT) samples, controls and calibrators; - 15 positions for reagent bottles at ambient temperature; • All reagent positions can be assigned as R1, R2 and R3; • One needle with level detection, collision protection and integrated mixer; • All sample positions can contain 13 mm Ø primary tubes or sample cups. Delivering trouble free results WAVELENGTH RANGE • 340 - 800 nm; • Optical unit with 8 position filter wheel; • Automatic wavelength selection • 340, 405, 505, 546, 578, 620, 660 nm standard installed; • One free position; • Other wavelenghts available on request. Pipetting system • 1000 μl Reagent syringe: - R1 volume 110 - 400 μl; - R2 volume 0 - 180 μl; - R3 volume 0 - 180 μl; - Programmable in 1 μl steps; • 100 μl Sample syringe; - Sample volume 1-30 μl; - Programmable in 0.1 μl steps. CUVETTE ROTOR • Disposable cuvette rotor with 48 cuvettes; • Path length 7 mm; • Minimum measuring volume 220 μl; • Measuring temperature 37˚C, controlled by Peltier elements. DIMENSIONS (BENCH TOP) • 89 x 58 x 60 cm (W x H x D); • No peripherals; • Weight: 67 kg. Interface • Instrument: RS232; • Host: RS232 or Etherhet (TCP/IP) through LIS-2A protocol. PHOTOMETRIC RANGE • -0.1 to 3.0 Absorbance; • Resolution 0.001 Abs. ANALYTICAL MODES (SINGLE, DUAL AND TRIPLE REAGENT SYSTEM) • Kinetic measurement with linearity check; • Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction; • Two point measurement; with or without slope blank; • Graphic plot of all measuring points; • Automatic rerun with sample reduction; • Non-linear calibration curves; • Prozone check for immunology tests; • Cut-off declaration; • Calculated tests. QUALITY CONTROL • Up to 15 different controls can be defined, 3 per test; • Westgard rules; • Levey-Jennings plots; • Quality control statistics. ELITech Clinical Systems is a global leader in BenchTop Chemistry Systems, with over 15,000 Chemistry Systems delivered. Our mission is to enable better medical decisions by bringing high-value diagnostics solutions and services to laboratories that are closer to the patient (proximity laboratories). ELITech Clinical Systems leadership originates from our ability to continuously provide differentiated products and services focused to proximity laboratories. ELITech Clinical Systems markets the Flexor EL Series, designed to deliver trouble-free results laboratories can trust. Delivering Trouble Free Results Laboratories can Trust ENVIRONMENTAL CONDITIONS • Temperature: 15 – 32 °C; • Humidity: 15 – 85% RH; • Altitude: up to 2000 m; • Plumbing: No dedicated water or drain required; • Electrical: - Voltage: 100 – 240 Vac; - Frequency: 50 – 60 Hz; - Power (max): 350 VA. Robust, Always gets the job done Trouble Free Operations with True workhorsereliability proven system Simplifies lab operations & reduces error Best in class operator interface, easy to train, Right Results, On Time with mistake Designedand error proofing reducing capabilities Best vendor services, application & lab operations support Management of difficult samples Cost effective, minimizes labor, maintenance & operate & maintain BAR CODE READER • Hand held CCD bar code reader (can read all common bar codes) used for test requisition, sample and reagent identification. Proven methodologies, referenced and traceable The Flexor EL Series builds on the robustness and reliability of the current Flexor systems, resulting from decades of proven experience in the design and manufacture of award winning BenchTop laboratory products. Together with a dedicated range of ready-to-use reagents from ELITech Clinical Systems, the Flexor EL Series provides an ideal chemistry solution for laboratory locations that are closer to the patient. Over the past decades, the ELITech Group Companies have established a solid distribution network that operates world-wide. More than twenty thousands of customers have experienced the quality, convenience and reliability of ELITech products. Local support is provided by dedicated and well trained sales and services organization. PRINTER • Printer supported by MS Windows™. PC • State of the art Pentium or equivalent; • Operating System: MS Windows™ XP . Water Consumption • ~250 mL per hour. CHEMISTRY system SAMPLE PREDILUTION • Programmable ratios 1:5 up to 1:100 in one step increments with 3 possible diluents: About ELITech Clinical Systems… STANDARDS and regulations • CE-IVD; • CB. Distributor contact information: Content of this document is subject to change without prior notification Flexor EL80™ is a trademark of Vital Scientific BV Windows™ is a trademark of Microsoft Belgium Brazil France Italy Middle East & Africa Serbia Switzerland The Netherlands T: + 44 1442 869320 UK United States T: + 1 855 354 8324 + 1 855 - ELITECH

Designed to meet the laboratory needs Intuitive software capabilities Together with a dedicated range of ready-to-use system offers minimal maintenance and effective reagents from ELITech Clinical Systems, the new use of consumables to provide a truly cost effective The simplicity of the software allows a skilled technician Flexor EL80 provides a fully integrated chemistry to operate the Flexor EL80 within an hour. Interactive solution for smaller or satellite laboratory locations. and intuitive routines lead the operator to the results Building on the successful Flexor family, the Flexor...