video corpo

CVX Interchangeable Turret Press
6Pages

{{requestButtons}}

Catalog excerpts

CVX Interchangeable Turret Press - 1

Hata CVX Interchangeable Turret Tablet Press

Open the catalog to page 1
CVX Interchangeable Turret Press - 2

TURRET AND PARTS REMOVAL FOR QUICK CHANGE-OVERS The HATA CVX Series provides easy access for maintenance, turret and parts removal, and complete manual Wash-in-Place cleaning. Our easy-clean design features locking pins and thumb screws for a quick and easy, no tool disassembly. Elizabeth v Hata International Turret removal shown in progress and turret removed completely.

Open the catalog to page 2
CVX Interchangeable Turret Press - 3

HATA CVX INTERCHANGEABLE TURRET TABLET PRESS SERIES The HATA CVX Interchangeable Tablet Press Series gives you all of the features you need from the small batch single-sided press to the large double-sided production press. Elizabeth Hata’s closed 2-stage feeding system and our state of the art software control system is standard on all HATA presses. The CVX Series Features: • Quick-change-over from one product to another • Easy-clean design with manual washdown • Easy access for quick parts removal • High visibility into the compression zone • Portable user-friendly kiosk control •...

Open the catalog to page 3
CVX Interchangeable Turret Press - 4

ADDITIONAL FEATURES Closed 2-Stage Feeding System HATA’s patented closed 2-stage feeding system virtually eliminates tablet weight variation. Granulation is drawn from the primary material hopper into the HATA supply hopper, then to the "closed" circulating feed shoe in two stages. Our patented system allows the computer to monitor and control the rate at which the powder is being fed into both the supply hopper and the feed shoe. This ensures a consistent flow of granulation with minimal density variation. User-Friendly Operator Interface A portable, user-friendly kiosk control provides...

Open the catalog to page 4
CVX Interchangeable Turret Press - 5

Extra Turret and Complete Upper and Lower CAM Assembly with Tooling Installed Reduce downtime and increase your production capabilities by utilizing the extra turret and cams with tooling installed. Turret Stand The stand is used as a cleaning cart and as a work station to install the tooling. Turret Carriage The turret carriage is used to remove the interchangeable turret from the HATA Press. SPECIFICATIONS Model: HT-CVX-SSU Number of Stations Maximum Diameter of Round Tablet* (mm) Fill Depth (mm) Tablets Per Hour Maximum Pressure (pre & main) Standard TSM Tooling Die Diameter (mm) Die...

Open the catalog to page 5
CVX Interchangeable Turret Press - 6

Elizabeth Carbide Die Co., Inc. World Headquarters 601 Linden Street McKeesport, PA 15132 USA Phone: 412-751-3000 Fax: 412-754-0755 www.eliz.com Elizabeth-Hata International 14559 Route 30 101 Peterson Drive North Huntingdon, PA 15642 USA Elizabeth Carbide of North Carolina 5801 East US Route 64 Lexington, NC 27292 USA Elizabeth Carbide Components 200 Monastery Drive Latrobe, PA 15650 USA Elizabeth Scheu & Kniss 1500 W. Ormsby Ave. Louisville, KY 40210 USA Elizabeth EPMO Z.I. Les Gailletros 41260 La Chaussee-Saint-Victor France Elizabeth Carbide Europe European Sales Office Aartselaar,...

Open the catalog to page 6

All Elizabeth catalogs and technical brochures