*mymedicalexpo

Automarker Sensor

1 / 2 PagesView full catalog

Automarker Sensor

Product catalog summary

Key Features & Benefits

Interchangeable sensor option for flexibility.
Manual or automatic session marking via switch or PLC relay.
Compatible with ValSuite® validation & calibration software.
Compliant with FDA 21 CFR Part 11 regulations.
Applicable in pharmaceutical, food, and medical industries.

TrackSense® Pro Data Loggers

The TrackSense® Pro data loggers are constructed from high-resistant stainless steel, offering precise and stable measurements for thermal processes. They support interchangeable sensors for measuring various parameters such as temperature, vacuum, and humidity. Data loggers are activated and read using the Multi reader station, and real-time data can be accessed via the Sky module. The ValSuite™ software facilitates data analysis and reporting.

Technical Specifications

Sensor Type: Automarker Sensor with contact-free switch.
Switch Cable: LEMO plug, 100 cm length.
IP Class: 40.
Logger Model: Pro 3G.
Operating Conditions: Temperature +5 to +50 °C, Pressure 0.9 – 1.1 Bar ABS, Humidity 10-95%.
Material: 316L Stainless Steel.
Dimensions: Diameter 25 mm, Length 44 mm, Weight 48 grams with battery.
Memory: 120,000 data points.
Sample Rate: 1 second to 24 hours.
Start Delay: Up to 14 days.
Safety: Intrinsically safe for ATEX environments.
Time Accuracy: ± 5 seconds per 24 hours.
Battery: TSP Standard Battery.

Note: For ATEX environments, refer to section 17 of the ATEX certificates for safe use conditions.

Catalog excerpts

Product Sheet Key Features & Benefits ✓ Unique interchangeable sensor option ✓ Marker(s) can be manually applied to sessions by pushing the switch - or automatically via PLC relay connection ✓ Works in conjunction with the ValSuite® validation & calibration software ✓ FDA 21 CFR Part 11 compliant ✓ Covers various applications within pharmaceutical, food and medical industries TrackSense® Pro Data Loggers The wireless TrackSense® Pro data loggers are made of a high resistant stainless steel with cutting edge technology that allows for immensely accurate and stable measurements when performing various thermal processes. All TrackSense® Pro data loggers are configured with interchangeable sensors able to measure temperature, vacuum, relative humidity, pressure, conductivity and CO2. Ellab’s data loggers are easily activated and read by the Multi reader station. When combined with the Sky module, data loggers can provide real time data via wireless communication. Utilizing the numerous functions of the FDA 21 CFR, Part 11 compliant ValSuite™ software, data is easily analyzed and distributed through various report options Ellab A/S • TrollesmindeaNe 25 • DK-3400 Hilleroed • Tel. +45 4452 0500 • www.ellab.com • E-Mail: [email protected]

Open the catalog to page 1

Product Sheet If equipment is used in ATEX environment, special conditions for safe use are stated in ATEX certificates, section 17 must be considered. Ellab A/S • TrollesmindeaNe 25 • DK-3400 Hilleroed • Tel. +45 4452 0500 • www.ellab.com • E-Mail: [email protected]

Open the catalog to page 2

All Ellab Validation & Monitoring Solutions catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list