video corpo

Bowie Dick Sensor

Bowie Dick Sensor

Bowie Dick Sensor

Product catalog summary
Key Features & Benefits
  • Accurate, reliable, and cost-efficient data logging.
  • Compact design for ease of use.
  • User-friendly software that eliminates guesswork and provides objective results.
  • Replaceable Process Challenge Device (PCD) for multiple cycle sequences.
  • Verification of critical sterilization parameters beyond traditional methods.
TrackSense® Pro Data Loggers

The TrackSense® Pro wireless data loggers are constructed from high-resistant stainless steel and incorporate advanced technology for precise and stable measurements during thermal processes. They feature interchangeable sensors for measuring temperature, vacuum, relative humidity, pressure, conductivity, and CO2. The data loggers are activated and read via a Multi reader station, and when used with the Sky module, they provide real-time data through wireless communication. The ValSuite® software, compliant with FDA 21 CFR, Part 11, facilitates data analysis and reporting.

Technical Specifications
  • Sensor Configuration: Bowie Dick Sensor
  • ISO Standard Compliance: 11140-4:2007 type B1, B2, and B3 at 121 °C and 134 °C
  • 3rd Party Test Institute: SAL GmbH
  • Type of Sterilizers: Steam Sterilizers/Autoclaves qualified for sterilization at 121°C or +134 °C according to EN 285 and EN ISO 17665
  • Measuring Principle: Piezoresistive/Electrical Resistance
  • Sensor Type: Strain Gauge/Pt1000
  • Temperature Measuring Range: 0 to +140 °C (Calibrated +25 to +140 °C)
  • Temperature Accuracy: ± 0.05 °C
  • Temperature Response Time: T-63% 0.8 Second, T-90% 1.7 Second
  • Pressure Measuring Range: 10 mBar to 6 Bar
  • Pressure Accuracy: ± 0.25% Full Scale (± 15 mBar)
  • PCD Housing Material: PEEK
  • Logger Configuration: Pro 3G
  • Operating Temperature: -20 to +150 °C
  • Operating Pressure: 0.001 mBar to 10 Bar ABS
  • Housing Material: 316L Stainless Steel
  • Dimensions: Diameter 25 mm, Length 100.2 mm including PCD (30 mm)
  • Weight with Battery: 208 g
  • Memory Capacity: 120,000 Data Points / 30,000 Samples
  • Sample Rate: Minimum 1 Second, Maximum 24 Hours
  • Intrinsically Safe: Ex II1GD ia IIC T3 Ga, -50 °C ≤ Tamb ≤ +105 °C
  • Time Accuracy: ± 5 Seconds Per 24 Hours
  • Battery: TSP Standard Battery

Note: For ATEX environments, refer to ATEX certificates, section 17 for safe use conditions.

See more

Catalog excerpts

Bowie Dick Sensor-1

Product Sheet TrackSense® Pro Wireless Data Logger Bowie Dick Sensor Accurate, reliable and cost efficient Very compact size User-friendly and intuitive software Eliminates guesswork and provides an objective result Replaceable PCD to run several cycles in a sequence Verification of critical sterilization parameters beyond that of traditional methods TrackSense® Pro Data Loggers The wireless TrackSense® Pro data loggers are made of a high resistant stainless steel with cutting edge technology that allows for immensely accurate and stable measurements when performing various thermal processes. All TrackSense® Pro data loggers are configured with interchangeable sensors able to measure temperature, vacuum, relative humidity, pressure, conductivity and CO2. Ellab’s data loggers are easily activated and read by the Multi reader station. When combined with the Sky module, data loggers can provide real time data via wireless communication. Utilizing the numerous functions of the FDA 21 CFR, Part 11 compliant ValSuite® software, data is easily analyzed and distributed through various report options Interested in this product? Contact sales today Ellab A/S • Trollesmindealle 25 • DK-3400 Hilleroed • Tel. +45 4452 0500 • www.ellab.com • E-Mail: [email protected]

 Open the catalog to page 1
Bowie Dick Sensor-2

Product Sheet If equipment is used in ATEX environment, special conditions for safe use are stated in ATEX certificates, section 17 must be considered. Ellab A/S • Trollesmindealle 25 • DK-3400 Hilleroed • Tel. +45 4452 0500 • www.ellab.com • E-Mail: [email protected]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.