• Interchangeable sensor option for flexibility.
• Real-time data capability with Sky module integration.
• Compatible with ValSuite® validation and calibration software.
• Compliant with FDA 21 CFR Part 11 regulations.
• Conductivity measurement range from 0 to 200 μS/cm.
• Applicable in pharmaceutical, food, and medical industries.

The TrackSense® Pro data loggers are constructed from high-resistant stainless steel, offering precise and stable measurements for thermal processes. They support interchangeable sensors for various measurements including temperature, vacuum, relative humidity, pressure, conductivity, and CO2. The data loggers can be activated and read using the Multi reader station, and when paired with the Sky module, they provide real-time data wirelessly. The ValSuite™ software, compliant with FDA 21 CFR Part 11, facilitates data analysis and reporting.

• Sensor Configuration: Conductivity and Temperature Sensor
• Conductivity Range: 0 to 200 μS/cm
• Measuring Principle: Electrical Conductivity / Electrical Resistance
• Sensor Element: Conductivity / Pt1000
• Contact Material: Peek (FDA compliant)
• Dimensions: 37 mm x 25 mm / 13 mm
• Immersion Depth: Minimum 25 mm
• Conductivity Resolution: 0.1 μS/cm
• Conductivity Accuracy: ± 1 μS/cm or ± 2.5% of reading
• IP Class: IP67
• Temperature Range: 0 °C to +100 °C
• Temperature Accuracy: ± 0.05 °C
• Logger Configuration: Pro 3G
• Operating Temperature: 0 to +100 °C
• Material: 316L Stainless Steel
• Dimensions: Diameter 25 mm, Length 44 mm
• Weight: 48 grams with battery
• Memory Capacity: 120,000 data points / 60,000 samples
• Sample Rate: Minimum 1 second, Maximum 24 hours
• Maximum Start Delay: 14 days
• Intrinsically Safe: Ex II1GD Ex ia IIC T3 Ga, -50°C ≤ Tamb ≤ +105°C
• Time Accuracy: ± 5 seconds per 24 hours
• Battery: TSP Standard Battery
• Note: The conductivity sensor is not designed for steam sterilization but can be autoclaved at +121 °C.