• Interchangeable sensor option for flexibility.
• Real-time data capability with Sky module integration.
• Compatible with ValSuite® validation & calibration software.
• Compliant with FDA 21 CFR Part 11 regulations.
• Humidity range from 0 to 100% with high accuracy of ±2%.
• Applicable in pharmaceutical, food, and medical industries.

The TrackSense® Pro data loggers are constructed from durable stainless steel and utilize advanced technology for precise and stable measurements in thermal processes. They support interchangeable sensors for measuring various parameters such as temperature, vacuum, relative humidity, pressure, conductivity, and CO2. The data loggers can be activated and read using the Multi reader station and, when paired with the Sky module, can transmit real-time data wirelessly. The ValSuite™ software, compliant with FDA 21 CFR Part 11, facilitates data analysis and reporting.

• Sensor Configuration: Relative Humidity and Temperature Sensor
• RH Measuring Range: 0 – 100% (Calibrated 10-90%)
• Measuring Principle: Capacitance Sensing / Electrical Resistance
• RH Accuracy: ± 2% at 25 °C non-condensing
• RH Resolution: 0.10%
• RH Response Time: <15 seconds in slowly moving air
• Temperature Measuring Range: 0 to +90 °C (Calibrated 10-90 °C)
• Temperature Accuracy: ± 0.1 °C from +10 to +90 °C
• Temperature Resolution: 0.01 °C
• Temperature Response Time: T-63%: 6.5 seconds, T-90%: 17 seconds
• Logger Configuration: Pro 3G
• Operating Temperature: 0 to +90 °C
• Material: 316L Stainless Steel
• Dimensions: Diameter 25 mm, Length 44 mm
• Weight: 48 grams with battery
• Memory Capacity: 120,000 data points / 60,000 samples
• Sample Rate: Minimum 1 second, Maximum 24 hours
• Start Delay: Up to 14 days
• Safety: Intrinsically safe with specific ATEX conditions
• Time Accuracy: ± 5 seconds per 24 hours
• Battery: TSP Standard Battery

Note: Requires ValSuite 5.2 or newer. Special conditions apply for ATEX environments as per section 17 of the ATEX certificates.