Product Sheet Key Features & Benefits ✓ Ideal for freeze drying applications that highly strain wires ✓ Very thin thermocouple wire (AWG30) with low impact on product temperature ✓ Unique interchangeable sensor option ✓ Real-time data option with Sky module ✓ Works in conjunction with the ValSuite® validation & calibration software ✓ FDA 21 CFR Part 11 compliant ✓ Temperature range of -50 to +62 °C ✓ Industry leading accuracy of ± 0.3 °C Calibrated TrackSense® Pro Data Loggers The wireless TrackSense® Pro data loggers are made of a high resistant stainless steel with cutting edge technology that allows for immensely accurate and stable measurements when performing various thermal processes. All TrackSense® Pro data loggers are configured with interchangeable sensors able to measure temperature, vacuum, relative humidity, pressure, conductivity and CO2. Ellab’s data loggers are easily activated and read by the Multi reader station. When combined with the Sky module, data loggers can provide real time data via wireless communication. Utilizing the numerous functions of the FDA 21 CFR, Part 11 compliant ValSuite™ software, data is easily analyzed and distributed through various report options Ellab A/S • TrollesmindeaNe 25 • DK-3400 Hilleroed • Tel. +45 4452 0500 • www.ellab.com • E-Mail: [email protected]

Product Sheet Sensor with this logger configuration: Temperature Measuring Range: Measuring principle: Sensor element: Accuracy: Position of Measuring Point from Tip: Cable Length: Cable Dimensions and Type: Sensor Response Time: T-63%: T-90%: Logger with this sensor configuration: Operating Temperature: Operating Pressure: House Material: Length: Weight with Battery: Memory Capacity: Minimum Sample Rate: Maximum Sample Rate: Maximum Start Delay: Intrinsically Safe: Time Accuracy: Battery: Thermocouple Sensor* -50 to +62 °C (Calibrated from -60 to +60 °C) -50 to +400°C when keeping the logger...